ACDelco 6314 - Accessory Drive Belt
$6199
In stock
limited availability at this price!
Pay over 3-12 months with 
. Learn more
. Learn more
ACDELCO part description
6314
Product Attributes
| Top Width (in) | 1.19 IN |
| Top Width (mm) | 30.0 MM |
| Outside Circumference (mm) | 1143 MM |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 4 | Abrasion: wear along the side could indicate misalignment due to a failed tensioner. |
| Product Description | ACDelco Professional, premium aftermarket Special Equipment V-Belts are specially designed for mini-bikes, all-terrain vehicles, golf carts, vintage snowmobiles, and other recreational vehicles. They retain dependability throughout a wide range of speed and load variations and their low temperature flexibility helps assure smooth vehicle operation. These premium aftermarket replacement special equipment v-belts are manufactured to meet your expectations for fit, form, and function. ⚠<b> WARNING:</b> Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| FAQ - Question 3 | Are there steps I can take to ensure a longer non-automotive belt life? |
| Color | Black |
| FAQ - Question 5 | Can I use the same non-automotive belt for multiple uses? |
| Good Maintenance Practices - Section 1 - Bullet 5 | Check for proper belt tension after 500 to 1,000 miles following belt installation. Recheck often, at least twice a year or every 6,000 miles. |
| FAQ - Question 1 | Could a non-automotive belt tear during use? |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 5 | Cracking: older neoprene belts crack as they near the end of their life cycle and often need to be replaced. |
| Good Maintenance Practices - Section 1 - Bullet 1 | Do not use belt dressings to stop belt slippage or noise. These are oil based and may cause belt deterioration. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 6 | Engine stops or backfires. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 2 | Glazing: shiny spots can indicate a slipping belt that isn't properly transferring power to accessories. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 8 | Headlights dim while driving. |
| FAQ - Question 4 | Is there a way to repair a torn non-automotive belt? |
| Features & Benefits - Bullet 1 | Its low temperature flexibility helps assure smooth vehicle operation |
| Material | Kevlar |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 9 | Loss of battery charge. |
| Features & Benefits - Bullet 5 | Manufactured to meet expectations for fit, form, and function |
| Good Maintenance Practices - Section 1 - Bullet 2 | Never twist a belt more than 90 degrees during inspection. This may damage the tensile cords and cause premature failure. |
| Programming Required | No |
| Top Cogged | No |
| FAQ - Answer 5 | No, use the belt in the way it's listed in the ACDelco belts and hoses catalog. |
| FAQ - Answer 4 | No, when the belt backing has been torn or cracked, the belt should be replaced. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 3 | Pilling: worn rubber can fill in grooves and cause noise, heat, vibration, and excessive wear. |
| Features & Benefits - Bullet 3 | Professional, premium aftermarket replacement |
| Features & Benefits - Bullet 4 | Provides the performance and dependability you expect from ACDelco |
| Features & Benefits - Bullet 2 | Reinforced with aramid fibers for extra strength on higher horsepower, high speed recreational application drives |
| Good Maintenance Practices - Section 1 - Bullet 3 | Replace V-belts after 3 to 4 years, or every 36,000 to 48,000 miles. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 1 | Rubber Loss: (most common belt wear) a belt wear gauge measures rubber loss, which can result in reduced power transfer from the crank to the accessories. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 7 | The belt is producing a squealing noise. |
| Good Maintenance Practices - Section 1 - Bullet 4 | Use an approved tension gauge to check belt tension. |
| FAQ - Question 2 | Will I know immediately if a non-automotive belt tears? |
| FAQ - Answer 3 | Yes, ensure that proper tension is applied and pulleys are aligned during installation. Leading causes of belt failure are improper tension and misaligned pulleys. Both these conditions cause excessive heat which leads to belt failure. |
| FAQ - Answer 1 | Yes, this may be indicative of an alignment issue. |
| FAQ - Answer 2 | Yes, you may lose power or stall out. |
Additional Information
| Warranty Special | Limited Lifetime Warranty (Parts Only). Please see ACDelco.com for more details|Limited Lifetime Warranty as long as the original purchaser still owns the vehicle (Parts Only). Please see ACDelcocanada.com for more details |
| Harmonized Tariff Code (HTS) | 4010313000 |
| Country of Origin 2 | MX |
| Country of Origin (Primary) | US |
| Warranty Special UOM | TX |
| UPC | 00021625280622 |
A true OEM auto parts brand for GM and non-GM vehicles, ACDelco® offers a wide portfolio of parts designed to keep vehicles on the road longer. These parts work precisely and fit perfectly because they are designed, engineered, tested, and backed by General Motors. But ACDelco also carries aftermarket components that go through the same 18-step quality approval process as the OE parts. Whether customers choose OE or aftermarket, they’d get the same reliable performance, precise engineering, and superior reliability for years to come. ACDelco’s expansive product portfolio includes alternators, filters, batteries, brakes, belts and hoses, oil and fluids, and suspension parts. These products are made to meet GM and non-GM vehicles’ ever-evolving powertrain, collision, maintenance, and repair needs.
California residents see Prop 65 Warning(s)
Don't know your part number?
Take a photo and we'll identify it!
