Redneck Trailer AH25555F - 5 on 5.5in Standard AG Hub Only For 5K Axles

Agricultural Hub W/ 5 on 5.5" Bolt Pattern For 5,000lb Axles

There is no need to worry about the races as they are already pressed into the hub for you. The bearings, grease seal, grease cap, and wheel nuts for the hub are sold separately. Each hub has a capacity of 2,500lbs. Spindle nut and spindle washer sold separately.

• Agricultural hubs are designed for low speed applications not to exceed 20 MPH

Items Sold Separately:

• 1 LM67048 Outer Bearing (1.25" ID)
• 1 LM48548 Inner Bearing (.75" ID)
• 1 LM67010 Outer Race (Already Pressed In) 2.328"
• 1 LM48510 Inner Race (Already Pressed In) 1.781"
• 1 SL175 Grease Seal (1.5" x 2.332")
• 1 45896 Grease Cap (2.44")
• 5 LB509 Wheel Bolts
• 1 5 on 5.5" Hub
• 2,500lb Capacity Per Hub

Please refer to the diagram Image for these measurements

To determine the bolt circle on hubs or wheels with an odd number of bolt holes, measure from outside to center of the studs across the pattern(bolt patterns are always measured in inches). Example: If you were to number the studs 1, 2, 3, then you would measure from the outside of stud 1 to the center of stud 3.

REDNECK TRAILER AH25555F Cross Reference

We have 1 alternatives for the AH25555F by REDNECK TRAILER:

• 71200