ACDelco 17319 - Professional™ V-Belt - Standard, High Capacity
$2099
MSRP: $23.20
Save: $2.21
In stock
limited availability at this price!
Pay over 3-12 months with 
. Learn more
. Learn more
ACDELCO part description
Professional™ V-Belt - Standard, High Capacity
Product Attributes
| Top Width | 0.47 in |
| Top Width | 12.0 mm |
| Measurements | 50 1/2 in x 32 3/8 |
| Effective Length | 813 mm |
| Outside Circumference | 822 mm |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 4 | Abrasion: wear along the side could indicate misalignment due to a failed tensioner. |
| Product Description | ACDelco Professional, premium aftermarket V-Belts serve as replacement belts for today's most demanding engine drives. Due to thermal forces, these variable notched belts actually tighten on the drive as they get hot. This results in improved belt performance by reducing tension, decay, and noise. These premium aftermarket replacement v-belts are manufactured to meet your expectations for fit, form, and function. ⚠<b> WARNING:</b> Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| FAQ - Question 3 | Are there steps I can take to ensure a longer automotive belt life? |
| Color | Black |
| FAQ - Question 5 | Can I use the same automotive belt for multiple uses? |
| Good Maintenance Practices - Section 1 - Bullet 6 | Check for proper belt tension after 500 to 1,000 miles following belt installation. Recheck often, at least twice a year or every 6,000 miles. |
| FAQ - Question 1 | Could an automotive belt tear during use? |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 5 | Cracking: older neoprene belts crack as they near the end of their life cycle and often need to be replaced. |
| Good Maintenance Practices - Section 1 - Bullet 1 | Do not use belt dressings to stop belt slippage or noise. These are oil based and may cause belt deterioration. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 6 | Engine stops or backfires. |
| Material | Fiber Loaded Rubber |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 2 | Glazing: shiny spots can indicate a slipping belt that isn't properly transferring power to accessories. |
| Features & Benefits - Bullet 2 | Has thermally active tensile cords that provide maintenance free performance when properly installed and tensioned |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 8 | Headlights dim while driving. |
| FAQ - Question 4 | Is there a way to repair a torn automotive belt? |
| Features & Benefits - Bullet 1 | Its fiber loaded rubber stock puts more flexibility along the length of the belt, yet gives the belt greater lateral stability in the pulley |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 9 | Loss of battery charge. |
| Features & Benefits - Bullet 3 | Manufactured with form ground to ensure precise top width and sidewall dimensional control for proper fit in the pulley as well as a smoother, quieter running belt |
| Good Maintenance Practices - Section 1 - Bullet 2 | Never twist a belt more than 90 degrees during inspection. This may damage the tensile cords and cause premature failure. |
| Top Cogged | No |
| FAQ - Answer 6 | No, remember the leading cause of belt failure is improper tension and misaligned pulleys. Improper tension will cause the belt to slip and you may notice a loss of performance from the air conditioning system as well as increased heat under the hood. High heat can lead to premature accessory failure. |
| FAQ - Answer 5 | No, use the belt in the way it's listed in the ACDelco belts and hoses catalog. |
| FAQ - Answer 4 | No, when the belt backing has been torn or cracked, the belt should be replaced. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 3 | Pilling: worn rubber can fill in grooves and cause noise, heat, vibration, and excessive wear. |
| Good Maintenance Practices - Section 1 - Bullet 3 | Replace serpentine belts every 60,000 - 100,000 miles. Check vehicle's owner's manual. |
| Good Maintenance Practices - Section 1 - Bullet 4 | Replace V-belts after 3 to 4 years, or every 36,000 to 48,000 miles. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 1 | Rubber Loss: (most common belt wear) a belt wear gauge measures rubber loss, which can result in reduced power transfer from the crank to the accessories. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 7 | The belt is producing a squealing noise. |
| Good Maintenance Practices - Section 1 - Bullet 5 | Use an approved tension gauge to check belt tension. |
| FAQ - Question 6 | Will a worn automotive belt affect gas mileage? |
| FAQ - Question 2 | Will I know immediately if an automotive belt tears? |
| FAQ - Answer 3 | Yes, the leading causes of belt failure are improper tension and misaligned pulleys. Both these conditions cause excessive heat which leads to belt failure. Have your belts checked every 3,000 miles for belt wear, proper tension, and pulley alignment. |
| FAQ - Answer 1 | Yes, this may be indicative of an alignment issue or a failed tensioner. |
| FAQ - Answer 2 | Yes, you may lose your power steering or stall out. Your car is not drivable when your drive belt fails. |
Additional Information
| Warranty Special | Limited Lifetime Warranty (Parts Only). Please see ACDelco.com for more details|Limited Lifetime Warranty as long as the original purchaser still owns the vehicle (Parts Only). Please see ACDelcocanada.com for more details |
| Harmonized Tariff Code (HTS) | 4010313000 |
| Country of Origin 2 | MX |
| Country of Origin (Primary) | US |
| Warranty Special UOM | TX |
| UPC | 00021625253015 |
ACDELCO 17319 Cross Reference
We have 3 alternatives for the 17319 by ACDELCO:
Fits Vehicles
- Volvo WAH (1996-2001)
- International A132 (1957-1958)
- International A130 (1957-1958)
- International A122 (1957-1958)
- International A120 (1957-1958)
- International A112 (1957-1958)
- International A110 (1957-1958)
- International A102 (1957-1958)
- International A100 Truck (1957-1958)
- International B132 (1959-1960)
- International B130 (1959-1960)
- International B122 (1959-1960)
- International B120 (1959-1960)
- International B112 (1959-1960)
- International B110 (1959-1960)
- International B102 (1959-1960)
- International B100 (1959-1960)
- International M Series Van (1963-1964)
- International AM150 (1961-1964)
- International CM80 (1963-1965)
- International CM75 (1963-1965)
- International CM110 (1963-1965)
- International AM130 (1961-1965)
- International AM120 (1961-1965)
- International AB1400 (1965)
- International AB140 (1961-1965)
- International AB1200 (1965)
- International AB120 (1961-1965)
- International M700 (1966-1967)
- International M800 Navy (1969)
- International M1400 (1966-1967, 1969)
- International MA1200 (1967-1970)
- International M800 Post Office (1969-1970)
- International M800 (1966-1970)
- International M1200 (1966-1970)
- International M1100 (1966-1970)
- International 1954 (1984)
- International S1854 (1983-1987)
- International S1853 (1983-1988)
- International S1754 (1983-1988)
- International 1854 (1983-1988)
- International 1754 (1983-1988)
- Freightliner FLT086 (1981-1988)
- Freightliner FLD120 (1988)
- Freightliner FLC120 (1985-1988)
- White WHS (1986)
- White WHL (1986)
- Toyota Corolla (1968-1979, 1983-1987)
- Plymouth Colt (1989-1995)
- Nissan 200SX (1984-1987)
- Nissan Tsuru (1984-1988)
- Nissan Sentra (1983-1988)
- Nissan Pulsar NX (1987-1988)
- Mitsubishi Montero (1989-1994)
- Mitsubishi Mighty Max (1990-1994)
- Mitsubishi Mirage (1989-1996)
- Mercedes-Benz 230S (1966-1967)
- Mercedes-Benz 200D (1966-1968)
- Mercedes-Benz 200 (1966-1968)
- Mercedes-Benz 230 (1966-1969)
- Mercedes-Benz 280SE (1979-1980)
- Mercedes-Benz 280E (1979-1981)
- Mercedes-Benz 280CE (1979-1981)
- Mazda 808 (1976-1977)
- Mazda 626 (1979)
- Jaguar XJ12 (1973-1979, 1981, 1992)
- Jaguar XJS (1976-1980, 1982-1992, 1994)
- Honda Accord (1976-1979)
- GMC Brigadier (1982-1983)
- Ford Courier (1977-1978)
- Ford Festiva (1993)
- Eagle Vista (1990-1992)
- Eagle Summit (1989-1996)
- Dodge Raider (1989)
- Dodge Ram 50 (1990-1991)
- Dodge Colt (1971-1974, 1989-1995)
- BMW 733i (1982)
- BMW 633CSi (1983)
- BMW 528e (1987)
- BMW M5 (1988)
- BMW M3 (1988-1991)
- BMW 735iL (1991)
- BMW 735i (1991)
A true OEM auto parts brand for GM and non-GM vehicles, ACDelco® offers a wide portfolio of parts designed to keep vehicles on the road longer. These parts work precisely and fit perfectly because they are designed, engineered, tested, and backed by General Motors. But ACDelco also carries aftermarket components that go through the same 18-step quality approval process as the OE parts. Whether customers choose OE or aftermarket, they’d get the same reliable performance, precise engineering, and superior reliability for years to come. ACDelco’s expansive product portfolio includes alternators, filters, batteries, brakes, belts and hoses, oil and fluids, and suspension parts. These products are made to meet GM and non-GM vehicles’ ever-evolving powertrain, collision, maintenance, and repair needs.
California residents see Prop 65 Warning(s)
Don't know your part number?
Take a photo and we'll identify it!
