Electrical & Lighting Engine & Drivetrain Brakes, Suspension, & Steering Body Tire & Wheel Other Parts & Supplies Top Searches

A-1 CARDONE 19239 Brake Caliper

★★★★★ (0)
A-1 Cardone 19239 Disc Brake Caliper Brake Caliper
A-1 CARDONE
Tap to view 2 more

$110.86

MSRP Pricing shown.

Out of Stock

We cannot fulfill orders for this part at this time. Please check back later or request a stock notification to receive an email.

We may have similar parts for sale. Search Alternatives >

A-1 CARDONE 19239 Part Description

Manufacturer

A-1 CARDONE

Product Description

Brake Caliper

Application Summary

Fiat 124 1983-68, X-1/9 1982-74

Features & Benefits

  • Pistons are durable, resistant to cracking or pitting and handle great loads.
  • Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
  • Mounting bracket is included where applicable for a hassle-free installation.
  • Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
  • New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
  • New bleeder screws provide trouble-free bleeding and a positive seal.
  • New washers are included where applicable for a proper seal.
  • A plastic cap plug protects every brake port thread to ensure trouble-free installation.
  • New stainless steel hardware clips and new mounting pins are included where applicable.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

Caliper, Brake Caliper, Disc Brake Caliper, Unloaded Caliper, Unloaded Brake Caliper, Power Brake Caliper, Hydraulic Disc Brake Caliper, Brakes

A-1 CARDONE 19239 Specifications

Product Attributes

Inlet Port Size0.38
Piston Quantity1
Piston MaterialSteel
Package ContentsCaliper; Instruction Sheet; Hardware Kit
Bleeder Port SizeM8x1.25
Brake Caliper FinishOil Emulsion
Installation Hardware IncludedYes
Pads IncludedNo
Mounting Bolts IncludedNo
Product ConditionRemanufactured
E-wasteNo
Piston Size (OD) (mm)33.93
Piston Size (OD) (in)1.34
FAQsWhat type of grease is used on floating caliper mounting pins?
Features and BenefitsRubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
Caliper ColorGray
Abutment Clips IncludedYes
Anti-Rattle Spring IncludedYes
Bleeder Screw IncludedYes
Bleeder Screw Quantity1
Bracket IncludedNo
Disc Brake Caliper Casting MaterialAluminum
Caliper ColorGray
Caliper FinishOil Emulsion
Caliper Slides IncludedYes
Caliper TypeFloating
Casting Number4182768
Grade TypeRegular
Inlet Fitting TypeInverted Flare
Inlet Thread Size3/8x24
Mounting Bolt IncludedNo
Mounting Bracket IncludedNo
Mounting Hardware IncludedYes
Pad Wear Sensor IncludedNo
Pads IncludedNo
Piston Diameter1.336 IN
Piston Diameter33.9344 MM
Piston MaterialSteel
Piston Quantity1
Bleeder Screw Cap IncludedNo
Rust Resistant CoatingYes
Dust Boots IncludedYes
Bleeder Thread SizeM8x1.25
Inlet Port Size0.375 IN
Inlet Port Size9.52125 MM
Contains Electronic ComponentsNo
Does it require SDSNo
Is Item A ChemicalNo
Is Or Contains A BatteryNo
Is Or Contains A BulbNo
Is Prop Sixty Five AffectedNo
Is the item CARB affectedNo
FAQ_Q1Can I switch out a Phenolic Piston Caliper for a Steel Piston Caliper or vice versa?
FAA_A1Not recommended. The O.E. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle. It is recommended that the installer follow the manufacturer's recommendations.
FAQ_Q2What type of fluid should I use: DOT 3, DOT 4, or DOT 5?
FAA_A2As a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container.
FAQ_Q3Car pulls to one side during braking. Why?
FAA_A3Inspect both calipers for binding or sticky slides or pins. Also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation.
FAQ_Q4Brakes squeal all of the time. What's causing the squeal?
FAA_A4Brake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish.
FAQ_Q5Could calipers be the cause of a low brake pedal?
FAA_A5A symptom of a low brake pedal is usually caused by air in the system, misadjusted rear brake shoes, deteriorated brake hose(s) or a defective master cylinder.
FAQ_Q6What type of grease is used on floating caliper mounting pins?
FAA_A6A silicone grease is used on floating caliper mounting pins.
FAQ_Q7Do all of your Calipers come with the new hardware and a mounting bracket for installation?
FAA_A7New hardware is included with all of our Calipers however the mounting bracket is an added option depending on part number and application. Mounting Brackets are also sold separately for most applications.
Inlet Thread Size3/8x24

Additional Information

Remanufactured PartY
Warranty Distance24000
Warranty Distance UOMDH
Warranty Special UOMTX
Warranty Time24
Warranty Time UOMMO
Country of Origin (Primary)MX
Harmonized Tariff Code (Schedule B)8708300050
Harmonized Tariff Code (HTS)8708305090
Canadian Harmonizing Tariff Code8708309920
UPC00082617014212

A-1 CARDONE 19239 Cross References

BrandPart Number
CENTRIC141.04501, 141.04503

A-1 CARDONE 19239 Fits Vehicles

  • Fiat 124 (1968-1983)
  • Fiat X-1/9 (1974-1982)

A-1 CARDONE 19239 Customer Reviews

No reviews yet

Be the first to review this product!

Write a Review

A-1 Cardone 19239 Disc Brake Caliper Brake Caliper

A-1 CARDONE 19239

Brake Caliper

*
*

Maximum 100 characters.

Maximum 500 characters.

Order number must be in the format F followed by 9 digits (e.g., F100000000)

*

You can upload up to 3 images to help illustrate your review. Supported formats: JPG, PNG, GIF, WebP

* Required fields

Review Guidelines

  • • Focus on the product's performance and quality
  • • Include details about installation and usage
  • • Be honest and constructive in your feedback
  • • Avoid personal information or inappropriate content

Please complete the reCAPTCHA verification to submit your review.

A-1 CARDONE 19239 Manufacturer Information

A-1 Cardone Ind.® is a leading manufacturer and distributor of automotive parts and accessories, including master cylinders, clutches, calipers, and other braking system components. Its comprehensive range of products is made using the highest quality materials and the most advanced technology to ensure reliable performance, safety, and reliability. The company traces back its roots more than 35 years ago when Michael Cardone, Sr. remanufactures his first product: the windshield wiper motor. From then on, the name A-1 Cardone has been a go-to brand of automotive enthusiasts and fleet owners when it comes to new and remanufactured products that offer not just reliability but also long-lasting service.

A-1 CARDONE 19239 Questions & Answers

No questions yet

Be the first to ask a question about this product!

California Proposition 65 Warning California residents see

Related Searches

Recommended Products

More from A-1 CARDONE

(Browse all)