ACDELCO part description

Technical Specifications

Part Number 14675B

Product Description

Rear Brake Shoe Set

Product Attributes

Height (in) 3.8 in
Weight (lb) 6.6 lb
Width (in) 8.8 in
Length (In) 9.7 IN
Secondary Shoe Friction Material Length (in) 10in
Primary Shoe Friction Material Length (in) 10in
Drum Inside Diameter (in) 10 in
Primary Shoe Friction Material Length (mm) 254mm
Secondary Shoe Friction Material Length (mm) 254mm
Brake Drum Diameter 10 in
Product Description ACDelco Silver (Advantage) Bonded Brake Shoes are a quality, high value alternative for General Motors vehicles as well as most makes and models and are backed by General Motors. These bonded brakes deliver strong braking power while reducing noise and vibration. The chamfer angle and vane configuration follow the OE design. Also no machining is required. ACDelco Silver (Advantage) Bonded Brake Shoes are ready to be installed right out of the box. ACDelco Silver (Advantage) parts are a good choice for many vehicles on the road today. Some ACDelco Silver parts may have formerly appeared as ACDelco Advantage. &#9888;<b> WARNING:</b> Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Features & Benefits - Bullet 4 Available in riveted and bonded for various vehicle applications
Features & Benefits - Bullet 1 Basic shims, slots, and chamfers help to diminish noise, vibration, and braking harshness
Friction Material Attachment Bonded
Signs of Wear & Troubleshooting - Section 1 - Bullet 1 Brake pedal pulsation (not to be confused with normal ABS operation).
Signs of Wear & Troubleshooting - Section 1 - Header Brake shoe signs of wear include:
Good Maintenance Practices - Section 1 - Bullet 2 Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 1 Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
FAQ - Question 3 Do I have to replace all my brake parts when replacing my brake shoes?
FAQ - Question 1 Do I have to replace my brake shoes after a certain amount of time?
FAQ - Question 2 Do I need to check my brake fluid when replacing other brake parts?
Features & Benefits - Bullet 6 Economical value with dependable quality
Features & Benefits - Bullet 7 For General Motors vehicles as well as most makes and models
Good Maintenance Practices - Section 1 - Bullet 3 Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 2 - Bullet 2 Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 1 Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 3 Inspection of wheel bearings and grease seals.
Signs of Wear & Troubleshooting - Section 1 - Bullet 3 Low brake pedal height.
Programming Required No
Mounting Hardware Included No
FAQ - Answer 3 No, but it is a good idea to inspect them for wear-out, cracking, leaking etc.
FAQ - Answer 1 No, but it is a good idea to inspect your brake shoes at each tire rotation.
Features & Benefits - Bullet 3 Non-directional brake surface finish for consistent braking
Good Maintenance Practices - Section 2 - Bullet 4 Parking brake adjustments (as needed).
Features & Benefits - Bullet 2 Quality validated for proper metallurgy and correct brake plate thickness
Features & Benefits - Bullet 5 Some ACDelco Silver parts may have formerly appeared as ACDelco Advantage
Signs of Wear & Troubleshooting - Section 1 - Bullet 2 Squealing or grinding noises.
Good Maintenance Practices - Section 1 - Header The following inspections and maintenance procedures can help prevent potential brake problems:
Good Maintenance Practices - Section 2 - Header The following should be conducted by a qualified technician:
Signs of Wear & Troubleshooting - Section 1 - Bullet 4 Vehicle pulls to the left or right when brakes are applied.
FAQ - Answer 2 Yes, it is a good idea to inspect your brake fluid often.
Brake Drum Diameter 254 MM
Brake Shoe Width 2.244 in
Brake Shoe Width 57 MM
Friction Material Organic

Additional Information

Warranty Special 12 Months/Unlimited Miles Warranty (Parts Only). Please see ACDelco.com for more details|12 Months/20,000 Kilometers (Parts Only). Please see ACDelcocanada.com for more details
Harmonized Tariff Code (HTS) 8708305040
Country of Origin (Primary) CN
Country of Origin 2 MX
Country of Origin 3 US
Warranty Special UOM TX
UPC 00707773851401

Fits Vehicles

  • GMC K1500 (1993-1999)
  • GMC C1500 (1993-1999)
  • Chevrolet K1500 (1993-1999)
  • Chevrolet C1500 (1993-1999)
  • GMC Yukon (1995-1999)
  • Chevrolet Tahoe (1995-2000)

A true OEM auto parts brand for GM and non-GM vehicles, ACDelco® offers a wide portfolio of parts designed to keep vehicles on the road longer. These parts work precisely and fit perfectly because they are designed, engineered, tested, and backed by General Motors. But ACDelco also carries aftermarket components that go through the same 18-step quality approval process as the OE parts. Whether customers choose OE or aftermarket, they’d get the same reliable performance, precise engineering, and superior reliability for years to come. ACDelco’s expansive product portfolio includes alternators, filters, batteries, brakes, belts and hoses, oil and fluids, and suspension parts. These products are made to meet GM and non-GM vehicles’ ever-evolving powertrain, collision, maintenance, and repair needs.

Don't know your part number?

Take a photo and we'll identify it!

Recommended Products

More from ACDELCO (Browse all)