ACDELCO part description

WIRE KIT SPLG

Product Attributes

Spark Plug End Boot Quantity Angled 0
Spark Plug End Boot Degree 180 DD
Weight (lb) 1.52 lb
Height (in) 6 in
Outside Diameter 7 MM
Insulation Outside Diameter 7 MM
Spark Plug End Boot Quantity Straight 8
Width (in) 10 in
Length (In) 36.2 IN
Length (mm) 919 mm
Maximum Wire Length (mm) 919 mm
Distributor Coil End Boot Type Silicone Angled
Resistance 30000 82
Product Description ACDelco Professional Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are a high quality replacement for many vehicles on the road today. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plugs. These premium aftermarket replacement components are manufactured to meet your expectations for fit, form, and function. &#9888;<b> WARNING:</b> Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Good Maintenance Practices - Section 1 - Bullet 1 Before purchasing and installing a spark plug wire, make sure they are the correct size and fit for your vehicle.
Insulation Color Black
Spark Plug End Boot Color Black
Coil End Boot Color Black
BOOT COLOR Black
Core Material Fiberglass Reinforced Latex Graphite
Spark Plug End Boot Material Hi Temp Silicon
Signs of Wear & Troubleshooting - Section 1 - Bullet 4 Illuminated Check Engine light
Good Maintenance Practices - Section 1 - Bullet 3 Keep plug wires free from contact with other engine components.
Features & Benefits - Bullet 3 Manufactured to meet expectations for fit, form, and function
Programming Required No
Wire Separators Included No
Features & Benefits - Bullet 1 Professional, premium aftermarket replacement
Features & Benefits - Bullet 2 Provides the performance and dependability you expect from ACDelco
Good Maintenance Practices - Section 1 - Bullet 5 Regularly inspect your spark plug wires for signs of damage or wear, and replace them if signs of damage are found.
Good Maintenance Practices - Section 1 - Bullet 4 Reinstall plug wires in the original position, using correct routing and utilizing appropriate hold downs.
Good Maintenance Practices - Section 1 - Bullet 2 Remove the wire by holding the boot, not the wire.
FAQ - Question 1 Should grease be installed into a spark plug boot?
Distributor Coil End Terminal Type Snap Lock
Insulation Outside Diameter 0.28 IN
Spark Plug End Terminal Type Snap Lock
Boot Type Solid
Universal Or Specific Fit Specific
Distributor Coil End Boot Degree 45 DD
Noise Suppression Type Yes
FAQ - Answer 1 Yes. The use of dielectric grease in the boot helps prevent spark flashover and allows easier boot removal in the future.
Insulation Material Silicone Rubber
Spark Plug Boot Material Silicone Rubber
8979 20 IN
Wire 1 Length 508 MM
8980 22 IN
Wire 2 Length 558.8 MM
8981 24 IN
Wire 3 Length 609.6 MM
8982 28 IN
Wire 4 Length 711.2 MM
8983 28 IN
Wire 5 Length 711.2 MM
8984 32 IN
Wire 6 Length 812.8 MM
8985 32 IN
Wire 7 Length 812.8 MM
8986 36 IN
Wire 8 Length 914.4 MM
Coil Wire Length 330.2 MM
8987 13 IN

Additional Information

Warranty Special 24 Months/Unlimited Miles Limited Warranty (Parts Only). Please see ACDelco.com for more details|No Warranty
Harmonized Tariff Code (HTS) 8544300000
Country of Origin (Primary) MX
Country of Origin 2 US
Warranty Special UOM TX
UPC 00707773322345

Fits Vehicles

  • GMC P3500 (1996-1999)
  • GMC K3500 (1996-2000)
  • GMC K2500 Suburban (1996-1999)
  • GMC K2500 (1996-2000)
  • GMC C3500 (1996-2000)
  • GMC C2500 Suburban (1996-1999)
  • GMC C2500 (1996-2000)
  • Chevrolet P30 (1996-1999)
  • Chevrolet K3500 (1996-2000)
  • Chevrolet K2500 Suburban (1996-1999)
  • Chevrolet K2500 (1996-2000)
  • Chevrolet C3500 (1997-2000)
  • Chevrolet C2500 Suburban (1996-1999)
  • Chevrolet C2500 (1996-2000)
  • Chevrolet G30 (1996)
  • GMC Savana 3500 (1996-2000)
  • Chevrolet Express 3500 (1996-2000)
  • GMC C3500HD (1996, 1998)

A true OEM auto parts brand for GM and non-GM vehicles, ACDelco® offers a wide portfolio of parts designed to keep vehicles on the road longer. These parts work precisely and fit perfectly because they are designed, engineered, tested, and backed by General Motors. But ACDelco also carries aftermarket components that go through the same 18-step quality approval process as the OE parts. Whether customers choose OE or aftermarket, they’d get the same reliable performance, precise engineering, and superior reliability for years to come. ACDelco’s expansive product portfolio includes alternators, filters, batteries, brakes, belts and hoses, oil and fluids, and suspension parts. These products are made to meet GM and non-GM vehicles’ ever-evolving powertrain, collision, maintenance, and repair needs.

Don't know your part number?

Take a photo and we'll identify it!

Recommended Products

More from ACDELCO (Browse all)