ACDelco 17313 - High Capacity V-Belt
$2049
MSRP: $22.81
Save: $2.32
In stock
limited availability at this price!
Pay over 3-12 months with 
. Learn more
. Learn more
ACDELCO part description
BELT F (35)
Product Attributes
| Top Width | 0.47 in |
| Top Width | 12.0 mm |
| Measurements | 50 1/2 in x 31 7/8 |
| Effective Length | 800 mm |
| Outside Circumference | 809 mm |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 4 | Abrasion: wear along the side could indicate misalignment due to a failed tensioner. |
| Product Description | ACDelco Professional, premium aftermarket V-Belts serve as replacement belts for today's most demanding engine drives. Due to thermal forces, these variable notched belts actually tighten on the drive as they get hot. This results in improved belt performance by reducing tension, decay, and noise. These premium aftermarket replacement v-belts are manufactured to meet your expectations for fit, form, and function. ⚠<b> WARNING:</b> Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| FAQ - Question 3 | Are there steps I can take to ensure a longer automotive belt life? |
| Color | Black |
| FAQ - Question 5 | Can I use the same automotive belt for multiple uses? |
| Good Maintenance Practices - Section 1 - Bullet 6 | Check for proper belt tension after 500 to 1,000 miles following belt installation. Recheck often, at least twice a year or every 6,000 miles. |
| FAQ - Question 1 | Could an automotive belt tear during use? |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 5 | Cracking: older neoprene belts crack as they near the end of their life cycle and often need to be replaced. |
| Good Maintenance Practices - Section 1 - Bullet 1 | Do not use belt dressings to stop belt slippage or noise. These are oil based and may cause belt deterioration. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 6 | Engine stops or backfires. |
| Material | Fiber Loaded Rubber |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 2 | Glazing: shiny spots can indicate a slipping belt that isn't properly transferring power to accessories. |
| Features & Benefits - Bullet 2 | Has thermally active tensile cords that provide maintenance free performance when properly installed and tensioned |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 8 | Headlights dim while driving. |
| FAQ - Question 4 | Is there a way to repair a torn automotive belt? |
| Features & Benefits - Bullet 1 | Its fiber loaded rubber stock puts more flexibility along the length of the belt, yet gives the belt greater lateral stability in the pulley |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 9 | Loss of battery charge. |
| Features & Benefits - Bullet 3 | Manufactured with form ground to ensure precise top width and sidewall dimensional control for proper fit in the pulley as well as a smoother, quieter running belt |
| Good Maintenance Practices - Section 1 - Bullet 2 | Never twist a belt more than 90 degrees during inspection. This may damage the tensile cords and cause premature failure. |
| Top Cogged | No |
| FAQ - Answer 6 | No, remember the leading cause of belt failure is improper tension and misaligned pulleys. Improper tension will cause the belt to slip and you may notice a loss of performance from the air conditioning system as well as increased heat under the hood. High heat can lead to premature accessory failure. |
| FAQ - Answer 5 | No, use the belt in the way it's listed in the ACDelco belts and hoses catalog. |
| FAQ - Answer 4 | No, when the belt backing has been torn or cracked, the belt should be replaced. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 3 | Pilling: worn rubber can fill in grooves and cause noise, heat, vibration, and excessive wear. |
| Good Maintenance Practices - Section 1 - Bullet 3 | Replace serpentine belts every 60,000 - 100,000 miles. Check vehicle's owner's manual. |
| Good Maintenance Practices - Section 1 - Bullet 4 | Replace V-belts after 3 to 4 years, or every 36,000 to 48,000 miles. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 1 | Rubber Loss: (most common belt wear) a belt wear gauge measures rubber loss, which can result in reduced power transfer from the crank to the accessories. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 7 | The belt is producing a squealing noise. |
| Good Maintenance Practices - Section 1 - Bullet 5 | Use an approved tension gauge to check belt tension. |
| FAQ - Question 6 | Will a worn automotive belt affect gas mileage? |
| FAQ - Question 2 | Will I know immediately if an automotive belt tears? |
| FAQ - Answer 3 | Yes, the leading causes of belt failure are improper tension and misaligned pulleys. Both these conditions cause excessive heat which leads to belt failure. Have your belts checked every 3,000 miles for belt wear, proper tension, and pulley alignment. |
| FAQ - Answer 1 | Yes, this may be indicative of an alignment issue or a failed tensioner. |
| FAQ - Answer 2 | Yes, you may lose your power steering or stall out. Your car is not drivable when your drive belt fails. |
Additional Information
| Warranty Special | Limited Lifetime Warranty (Parts Only). Please see ACDelco.com for more details|Limited Lifetime Warranty as long as the original purchaser still owns the vehicle (Parts Only). Please see ACDelcocanada.com for more details |
| Harmonized Tariff Code (HTS) | 4010313000 |
| Country of Origin 2 | MX |
| Country of Origin (Primary) | US |
| Warranty Special UOM | TX |
| UPC | 00021625253008 |
ACDELCO 17313 Cross Reference
We have 2 alternatives for the 17313 by ACDELCO:
Fits Vehicles
- Peterbilt 282 (1976-1980)
- Peterbilt 359 (1981)
- Peterbilt 352 (1981)
- Peterbilt 348 (1981)
- Peterbilt 362 (1982-1988)
- Peterbilt 357 (1994-1995)
- Peterbilt 379 (1996)
- Peterbilt 377 (1996)
- Peterbilt 378 (1996, 1998)
- Mack R (1982-1983)
- Mack MH (1985)
- International COF5870 Paystar (1985)
- International F5070-SF/WW (1986)
- International F9370 (1985-1987)
- International F5070-SF (1984-1987)
- International 9370 (1985, 1987)
- International F5070-WW (1988)
- International F5070 (1984-1988)
- International COF9670 (1981-1988)
- International CO9670 (1981-1988)
- International 5070 (1985-1988)
- International 9300 (1988, 1992-1994)
- International 8200 (1995)
- International 9700 (1992-1993, 1996)
- International 9600 (1992-1993, 1995-1996)
- International 9800 SBA (1997)
- International 9400 (1992-1998)
- International 9200 SBA (1995-1998)
- International 9100 SBA (1998)
- White/GMC WCM (1988)
- White/GMC WHR (1995)
- White/GMC WHLB (1995)
- White/GMC WHL (1995)
- White/GMC WHEB (1995)
- White WCS (1981-1987)
- White WCM (1981-1988)
- White WCL (1984-1988)
- Toyota Corolla (1974)
- Peugeot 505 (1985-1989)
- Mercedes-Benz 280C (1973)
- Mercedes-Benz 280 (1973)
- Mazda B2200 (1983)
- Mazda B2000 (1979-1984)
- John Deere Gator XUV 620i 4x4 (2007-2010)
- John Deere Gator HPX 4x4 Diesel (2010)
- John Deere Gator TX 4x2 Turf (2010-2012)
- John Deere Gator HPX 4x4 (2004-2015)
- John Deere Gator XUV 625i 4x4 (2011-2016)
- John Deere Gator TX 4x2 (2010-2017, 2019-2024)
- John Deere Gator TH 6x4 (2010-2016, 2019-2024)
- John Deere Gator HPX 615E (2018-2024)
- Jaguar XKE (1967-1969)
- Ford Courier (1972-1976, 1979-1982)
- BMW 2800CS (1968-1971)
- BMW 2800 (1968-1971)
- BMW 2500 (1968-1971)
- BMW Bavaria (1974)
- BMW 3.0S (1974)
- BMW 3.0CSi (1974)
- BMW 3.0CS (1974)
- BMW 3.0Si (1975-1976)
- BMW 630CSi (1977-1978)
- BMW 530i (1975-1978)
- BMW 528i (1979-1981)
- BMW 633CSi (1978-1982)
- BMW 733i (1978-1981, 1983)
- BMW 533i (1983)
- BMW L7 (1986-1987)
- BMW L6 (1987)
- BMW 735i (1985-1987)
- BMW M6 (1987-1988)
- BMW 535is (1988)
- BMW 535i (1985-1988)
- BMW 635CSi (1986-1989)
- Audi 4000 (1982-1983)
- Audi 5000 (1982, 1984-1985)
- Audi 90 (1988)
- Audi 80 (1988-1990)
A true OEM auto parts brand for GM and non-GM vehicles, ACDelco® offers a wide portfolio of parts designed to keep vehicles on the road longer. These parts work precisely and fit perfectly because they are designed, engineered, tested, and backed by General Motors. But ACDelco also carries aftermarket components that go through the same 18-step quality approval process as the OE parts. Whether customers choose OE or aftermarket, they’d get the same reliable performance, precise engineering, and superior reliability for years to come. ACDelco’s expansive product portfolio includes alternators, filters, batteries, brakes, belts and hoses, oil and fluids, and suspension parts. These products are made to meet GM and non-GM vehicles’ ever-evolving powertrain, collision, maintenance, and repair needs.
California residents see Prop 65 Warning(s)
Don't know your part number?
Take a photo and we'll identify it!
