| New Or Remanufactured |
New |
| Series |
AD-IP® |
| Air Dryer Type |
Stand-Alone |
| Body Mounting |
3/8-16 UNC-2B (4x) |
| Cartridge Stabilizer Ring Included |
Not applicable to this part |
| Cartridge Thread |
1 1/4-7 UNC-2B |
| Cartridge Type |
PuraGuard (Coalescing) |
| Cautionary Note(s) |
Do not replace PG cartridge with Standard/GC cartridge. |
| Clamp Band Angle (CW from SUP) |
Not applicable to this part |
| Clearance to Remove Cartridge |
.50 IN |
| Control Port |
1/4-18 NPT |
| Cut-In Pressure |
Not applicable to this part |
| Cut-Out Pressure |
Not applicable to this part |
| Delivery Port 1 |
1/2-14 NPT |
| Delivery Port 2 |
Not applicable to this part |
| Extended Purge Port |
1/8-27 NPT (Plugged) |
| Governor Included |
No |
| Governor Mounting Bracket |
Not applicable to this part |
| Governor Mounting Bracket Angle (CCW from SUP) |
Not applicable to this part |
| Governor Type |
Not applicable to this part |
| Heater / Thermostat Rating |
12V / 90W |
| Heater Connector Color |
White |
| Heater Connector Type |
Metri-Pack 280 Series 2-Way Sealed Connector (Male) |
| Lower Mounting Bracket |
.41 IN x 1.15 IN Slot (2x) |
| Lower Mounting Bracket Angle (CCW from SUP) |
Loose in Box |
| Market Indicator |
Aftermarket New |
| Maximum Inlet Temperature |
160 AdegF (71 AdegC) |
| Minimum Operating Temperature |
-40 AdegF (-40 AdegC) |
| Purge Exhaust Port |
Standard |
| Purge Valve Type |
DLU (Hard Seat) |
| Purge Volume |
Standard |
| Remote Fill Feature |
Not applicable to this part |
| Remote Purge Port |
Not applicable to this part |
| Safety Valve Opening Pressure |
200 PSI |
| Supply Port |
1/2-14 NPT |
| Turbo Cut-off Function |
Not applicable to this part |
| Upper Mounting Bracket |
.41 IN x 1.15 IN Slot (2x) |
| Upper Mounting Bracket Angle (CCW from SUP) |
Not applicable to this part |
| Upper Mounting Bracket Height (from Lower Mounting Bracket) |
Loose in Box |
| Upper Mounting Type |
Cable |