COLE HERSEE 24117-01 - 24117-01 - Continuous Duty SPST Series

Cole Hersee intermittent and continous solenoids provide safe, dependable control of electrical systems on all type of DC low voltage vehicles. In addition, they are ideal for marine applications and for forward and reverse systems in golf carts, garden tractors, fork lift trucks and winch operation.
Solenoids are relays which are commonly used to remotely switch a heavier current. By using a solenoid, the amount of heavy wiring needed to power the load is reduced, since the control circuit mounted inside the cab typically utilizes a smaller wire gauge.
Housing are available in plated steel, phenolic or plasticized steel. A latching solenoid can act as a remote disconnect switch.


All products listed in this section can be found in Section H of the Cole Hersee D-275 CATALOG.

• 65A 12V continuouscertain switches, like solenoids can be rated for continuous or intermittent (infrequent) use. A comparably-constructed switch can generally be used with a higher current than the other switch, but with the proviso that a cooling time is allowed. There are no such restrictions on a 'continuous duty' switch. You can use a Continuous Duty Solenoid instead in place of an Intermittent Duty Solenoid, but it would have a shorter life expectancy compared to the purpose-built Intermittent Duty Solenoid. You cannot use an Intermittent Duty Solenoid in place of a Continuous Duty Solenoid! Duty spstSingle Pole, Single Throw. Circuitry which describes a switch. Single Pole means that this switch controls one circuit. Single Throw means that this switch has only two positions - and those are highly likely to be On and Off. Normally Off. PVC-coated. ulAbbreviation for Underwriters Laboratories, a US rating organization. Approved devices (such as many Cole Hersee switches) carry the UL label. & CE listed'UL Listed' Indicates that a device or component has met certain specifications as established by Underwriters Laboratory. It means that the device or component has been tested for conformance and is with UL so the device can be maked with the UL logo and the manufacturer claims conformance to the appropriate specification. Note that the ratings on UL electrical devices can be very conservative!.
• Bracket mounting holes 5/16" x 19/32" (7.9 x 15.1mm) on 2 13/64" centers (56.0mm)

COLE HERSEE 24117-01 Cross Reference

We have 2 alternatives for the 24117-01 by COLE HERSEE:

• 24117
• CHS2411701