ACDelco 9066C - 9066c
$13999
In stock
limited availability at this price!
Pay over 3-12 months with 
. Learn more
. Learn more
ACDELCO part description
9066c
Product Attributes
| Spark Plug End Boot Quantity Angled | 0 |
| Distributor Coil End Boot Degree | 90 DD |
| Spark Plug End Boot Quantity Straight | 6 |
| Outside Diameter | 7 MM |
| Insulation Outside Diameter | 7 MM |
| Length (In) | 38.5 IN |
| Length (mm) | 977.9 mm |
| Insulation Material | Silicone Rubber |
| Product Description | ACDelco Professional Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are a high quality replacement for many vehicles on the road today. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plugs. These premium aftermarket replacement components are manufactured to meet your expectations for fit, form, and function. ⚠<b> WARNING:</b> Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Good Maintenance Practices - Section 1 - Bullet 1 | Before purchasing and installing a spark plug wire, make sure they are the correct size and fit for your vehicle. |
| Coil End Boot Color | Black |
| Insulation Color | Black |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 1 | Engine misfire |
| Core Material | Fiberglass Reinforced Latex Graphite |
| Insulation Outside Diameter | 0.28 IN |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 4 | Illuminated Check Engine light |
| Good Maintenance Practices - Section 1 - Bullet 3 | Keep plug wires free from contact with other engine components. |
| Features & Benefits - Bullet 3 | Manufactured to meet expectations for fit, form, and function |
| Programming Required | No |
| Wire Separators Included | No |
| Features & Benefits - Bullet 1 | Professional, premium aftermarket replacement |
| Features & Benefits - Bullet 2 | Provides the performance and dependability you expect from ACDelco |
| Good Maintenance Practices - Section 1 - Bullet 5 | Regularly inspect your spark plug wires for signs of damage or wear, and replace them if signs of damage are found. |
| Good Maintenance Practices - Section 1 - Bullet 4 | Reinstall plug wires in the original position, using correct routing and utilizing appropriate hold downs. |
| Good Maintenance Practices - Section 1 - Bullet 2 | Remove the wire by holding the boot, not the wire. |
| FAQ - Question 1 | Should grease be installed into a spark plug boot? |
| Signs of Wear & Troubleshooting - Section 1 - Header | Signs of wear for spark plug wires include but are not limited to: |
| Spark Plug End Boot Degree | 180 DD |
| Distributor Coil End Boot Type | Silicone Angled |
| Spark Plug End Terminal Type | Snap Lock |
| Distributor Coil End Terminal Type | Snap Lock |
| Boot Type | Solid |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 3 | Sparks visible from plug wire grounding on any metal surface |
| Universal Or Specific Fit | Specific |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 2 | Wires worn from contact with other components |
| Noise Suppression Type | Yes |
| FAQ - Answer 1 | Yes. The use of dielectric grease in the boot helps prevent spark flashover and allows easier boot removal in the future. |
| Spark Plug Boot Material | Silicone Rubber |
| Spark Plug End Boot Color | Black |
| 8979 | 19 IN |
| Wire 1 Length | 482.6 MM |
| 8980 | 23 IN |
| Wire 2 Length | 584.2 MM |
| 8981 | 25 IN |
| Wire 3 Length | 635 MM |
| 8982 | 31 IN |
| Wire 4 Length | 787.4 MM |
| 8983 | 35 IN |
| Wire 5 Length | 889 MM |
| 8984 | 38 IN |
| Wire 6 Length | 965.2 MM |
| Coil Wire Length | 457.2 MM |
| 8987 | 18 IN |
Additional Information
| Warranty Special | 24 Months/Unlimited Miles Limited Warranty (Parts Only). Please see ACDelco.com for more details|No Warranty |
| Harmonized Tariff Code (HTS) | 8544602000 |
| Country of Origin (Primary) | US |
| Warranty Special UOM | TX |
| UPC | 00707773271254 |
Fits Vehicles
- BMW Bavaria (1972-1974)
- BMW 630CSi (1977)
- BMW 530i (1975-1978)
- BMW 3.0Si (1971, 1975-1976)
- BMW 3.0S (1971-1974)
- BMW 3.0CSL (1971)
- BMW 3.0CSi (1971-1974)
- BMW 3.0CS (1971-1974)
- BMW 2800CS (1968-1971)
- BMW 2800 (1968-1974)
- BMW 2500 (1968-1971)
- BMW 2.8 Bavaria (1971)
A true OEM auto parts brand for GM and non-GM vehicles, ACDelco® offers a wide portfolio of parts designed to keep vehicles on the road longer. These parts work precisely and fit perfectly because they are designed, engineered, tested, and backed by General Motors. But ACDelco also carries aftermarket components that go through the same 18-step quality approval process as the OE parts. Whether customers choose OE or aftermarket, they’d get the same reliable performance, precise engineering, and superior reliability for years to come. ACDelco’s expansive product portfolio includes alternators, filters, batteries, brakes, belts and hoses, oil and fluids, and suspension parts. These products are made to meet GM and non-GM vehicles’ ever-evolving powertrain, collision, maintenance, and repair needs.
California residents see Prop 65 Warning(s)
Don't know your part number?
Take a photo and we'll identify it!
