Name: ACDelco 18A82038 Disc Brake Rotor - 6 Lug Holes, Cast Iron, Plain Vented, Front
SKU: 18a82038
Price: 84.49 USD
Availability: InStock

ACDELCO part description

Gold™ Disc Brake Rotor - Front, Vented

Product Description

Front Brake Rotor

Product Attributes

BOLT CIRCLE	120mm (4.724 in.)
Lug Holes Quantity	6
Lug Holes Quantity	6
Quantity	1 Per Pack
Quantity	1 Per Pack
Rotor Construction	1-Piece
Rotor Construction	1-Piece
Rotor Design	Rotors Only
Rotor Design	Rotors Only
Rotor Material	Cast Iron
Rotor Material	Cast Iron
Rotor Style	Plain
Rotor Style	Plain
Rotor type	Vented
Width (in)	2.8 in
Bolt Circle Diameter (in)	4.724 in
Lug Quantity	6
Height (in)	12.8 in
Length (In)	13.5 IN
Weight	20.5 lb
Bolt Circle Diameter (mm)	120 mm
Material	Cast Iron
Features & Benefits - Bullet 3	Protective micron-thin layer helps to inhibit environmental corrosion better than non-coated roated rotors; proved in up to 200 hours of industry-standard salt-spray testing
Product Description	ACDelco Gold (Professional) Fully Coated Disc Brake Rotors are the high quality alternative to Original Equipment (OE) parts. These rotors are mounted to the wheel hub where the calipers can press the brake pads against the brake surface to help slow the vehicle. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional. ⚠<b> WARNING:</b> Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Good Maintenance Practices - Section 1 - Bullet 2	Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 1	Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 4	Check the thickness of your brake pads.
FAQ - Question 1	Does ACDelco offer other grades of brake rotors?
Construction	Full Cast
Features & Benefits - Bullet 1	COOL SHIELD coating - entire rotor surface including edges and vanes have baked-on zinc coating for durability and long lasting protection compared to uncoated
Good Maintenance Practices - Section 1 - Bullet 3	Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Features & Benefits - Bullet 2	Coated rotors will remain cleaner longer than non-coated
Good Maintenance Practices - Section 2 - Bullet 2	Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 1	Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 3	Inspection of wheel bearings and grease seals.
Features & Benefits - Bullet 6	Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
Slotted	No
Programming Required	No
Good Maintenance Practices - Section 2 - Bullet 4	Parking brake adjustments (as needed).
Features & Benefits - Bullet 5	Premium aftermarket replacement part
Grade Type	Regular
Surface Type	Smooth
Features & Benefits - Bullet 4	Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
Good Maintenance Practices - Section 1 - Header	The following inspections and maintenance procedures can help prevent potential brake problems:
Good Maintenance Practices - Section 2 - Header	The following should be conducted by a qualified technician:
Solid Or Vented Type Rotor	Vented
Rust Resistant Coating	Yes
FAQ - Answer 1	Yes, ACDelco also offers GM OE brake rotor and Advantage brake rotors.
Signs of Wear & Troubleshooting - Section 1 - Bullet 1	Vehicle pulls to the left or right when brakes are applied.
Signs of Wear & Troubleshooting - Section 1 - Bullet 2	Visible ridges or deep grooves on the rotor surface.
Inside Diameter	186.25 MM
Center Hole Diameter	80 MM
Disc Finish	Coated
Discard Thickness	0.984 IN
Discard Thickness	25 MM
Inside Diameter	7.333 IN
Center Hole Diameter	3.15 IN
Mounting Bolt Hole Circle Diameter	111 MM
Directional or Non-Directional Brake Surface	Non-Directional
Mounting Bolt Hole Diameter	16 MM
Mounting Bolt Hole Quantity	6
Nominal Thickness	1.067 IN
Nominal Thickness	27.1 MM
Outside Diameter	12.189 IN
Outside Diameter	309.6 MM
Overall Height	2.398 IN
Overall Height	60.9 MM
Stud/Lug Hole Quantity	6
Conventional Or Drum-In-Hat Type Rotor	Conventional
Mounting Bolt Hole Circle Diameter	4.37 IN
Mounting Bolt Hole Diameter	0.63 IN
ABS Tone Ring Included	No

Additional Information

Warranty Special	24 Months/Unlimited Miles Limited Warranty (Parts Only). Please see ACDelco.com for more details\|24 Months/40,000 Kilometers Limited Warranty (Parts Only). Please see ACDelcocanada.com for more details
Harmonized Tariff Code (HTS)	8708305030
Country of Origin (Primary)	CN
Warranty Special UOM	TX
UPC	00808709671817

Fits Vehicles

GMC Canyon (2015-2020)
Chevrolet Colorado (2015-2020)

A true OEM auto parts brand for GM and non-GM vehicles, ACDelco® offers a wide portfolio of parts designed to keep vehicles on the road longer. These parts work precisely and fit perfectly because they are designed, engineered, tested, and backed by General Motors. But ACDelco also carries aftermarket components that go through the same 18-step quality approval process as the OE parts. Whether customers choose OE or aftermarket, they’d get the same reliable performance, precise engineering, and superior reliability for years to come. ACDelco’s expansive product portfolio includes alternators, filters, batteries, brakes, belts and hoses, oil and fluids, and suspension parts. These products are made to meet GM and non-GM vehicles’ ever-evolving powertrain, collision, maintenance, and repair needs.