Tap to view 3 more
ACDelco 18A2812 - Disc Brake Rotor - 10 Lug Holes, Cast Iron, Plain Turned, Vented, Rear
$20399
In stock
limited availability at this price!
Pay over 3-12 months with 
. Learn more
. Learn more
ACDELCO part description
Gold™ Disc Brake Rotor - Rear, Vented
Product Description
Rear Brake Rotor
Product Attributes
| Nominal Thickness | 38.989mm (1.535 in.) |
| Center Hole Diameter | 139.45mm (5.49 in.) |
| BOLT CIRCLE | 162.56mm (6.4 in.) |
| Lug Holes Quantity | 10 |
| Lug Holes Quantity | 10 |
| Minimum Thickness | 37.389mm (1.472 in.) |
| Minimum Thickness | 37.389mm (1.472 in.) |
| Quantity | 1 Per Pack |
| Quantity | 1 Per Pack |
| Rotor Construction | 1-Piece |
| Rotor Construction | 1-Piece |
| Rotor Design | Rotors Only |
| Rotor Design | Rotors Only |
| Rotor Diameter | 391mm (15.4 in.) |
| Rotor Diameter | 391mm (15.4 in.) |
| Rotor Finish | Turned |
| Rotor Finish | Turned |
| Rotor Height | 124.46mm (4.9 in.) |
| Rotor Height | 124.46mm (4.9 in.) |
| Rotor Material | Cast Iron |
| Rotor Material | Cast Iron |
| Rotor Style | Plain |
| Rotor Style | Plain |
| Rotor type | Vented |
| Rotor type | Vented |
| Discard Thickness | 1.472 IN |
| Nominal Thickness | 1.535 IN |
| Pad Contact Surface Width | 2.4 IN |
| Height (in) | 4.9 in |
| Center Bore Diameter (in) | 5.5in |
| Bolt Circle Diameter (in) | 6.4 in |
| Bolt Hole Quantity | 10 |
| Overall Height | 4.89 IN |
| Width (in) | 16.1 in |
| Length (In) | 16.1 IN |
| Discard Thickness | 37.4 MM |
| Center Hole Diameter | 5.488 IN |
| Weight | 44.6 lb |
| Pad Contact Surface Width | 60.1 MM |
| Height (mm) | 124.2 mm |
| Center Bore Diameter (mm) | 139.4mm |
| Bolt Circle Diameter (mm) | 163 mm |
| Outside Diameter | 390 MM |
| Overall Rotor Diameter (mm) | 390.14mm |
| Center Hole Diameter | 139.4 MM |
| Product Description | ACDelco Professional Disc Brake Rotors provide reliable vehicle braking power and are a high quality replacement for many vehicles on the road today. They feature a thickness variation that is less than 0.0004 to minimize pedal pulsation, noise, and help to extend brake pad life. These rotors meet the SAE standard for structural integrity with OE matched G3000 qualified material delivering guaranteed performance. Also, no machining is required. ACDelco Advantage Disc Brake Rotors are ready to be installed right out of the box. ⚠<b> WARNING:</b> Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 1 | Brake pedal pulsation (not to be confused with normal ABS operation). |
| Signs of Wear & Troubleshooting - Section 1 - Header | Brake rotor signs of wear include: |
| Good Maintenance Practices - Section 1 - Bullet 2 | Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required. |
| Material | Cast Iron |
| Good Maintenance Practices - Section 1 - Bullet 1 | Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations. |
| Good Maintenance Practices - Section 1 - Bullet 4 | Check the thickness of your brake pads. |
| FAQ - Question 1 | Does ACDelco offer other grades of brake rotors? |
| Features & Benefits - Bullet 3 | Follows original manufacturers' designs for dispersing heat, helping to prolong pad and rotor life while reducing noise and vibration |
| Construction | Full Cast |
| Features & Benefits - Bullet 2 | Independently tested with Noise/Vibration/Harshness (NVH) and durability/wear testing; resulting in high quality and reliable products |
| Good Maintenance Practices - Section 1 - Bullet 3 | Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary). |
| Features & Benefits - Bullet 1 | Inspected for balance; resulting in smooth brake operation and noise reduction |
| Good Maintenance Practices - Section 2 - Bullet 2 | Inspection of brake lining and pads for wear or contamination by brake fluid or grease. |
| Good Maintenance Practices - Section 2 - Bullet 1 | Inspection of the brake hoses for brittleness or cracking. |
| Good Maintenance Practices - Section 2 - Bullet 3 | Inspection of wheel bearings and grease seals. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 3 | Low brake pedal height. |
| Slotted | No |
| Programming Required | No |
| Good Maintenance Practices - Section 2 - Bullet 4 | Parking brake adjustments (as needed). |
| Grade Type | Regular |
| Surface Type | Smooth |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 2 | Squealing or grinding noises. |
| Good Maintenance Practices - Section 1 - Header | The following inspections and maintenance procedures can help prevent potential brake problems: |
| Good Maintenance Practices - Section 2 - Header | The following should be conducted by a qualified technician: |
| Hat Finish | Turned |
| Disc Finish | Turned |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 4 | Vehicle pulls to the left or right when brakes are applied. |
| Solid Or Vented Type Rotor | Vented |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 5 | Visible ridges or deep grooves on the rotor surface. |
| Rust Resistant Coating | Yes |
| FAQ - Answer 1 | Yes, ACDelco also offers GM OE brake rotor and Advantage brake rotors. |
| Inside Diameter | 10.622 IN |
| Inside Diameter | 269.8 MM |
| Mounting Bolt Hole Circle Diameter | 6.417 IN |
| Mounting Bolt Hole Circle Diameter | 163 MM |
| Mounting Bolt Hole Diameter | 0.507 IN |
| Mounting Bolt Hole Diameter | 12.9 MM |
| Mounting Bolt Hole Quantity | 10 |
| Nominal Thickness | 39 MM |
| Outside Diameter | 15.354 IN |
| Overall Height | 124.2 MM |
| Stud/Lug Hole Quantity | 10 |
| Conventional Or Drum-In-Hat Type Rotor | Drum-In-Hat |
| ABS Tone Ring Included | No |
Additional Information
| Warranty Special | 24 Months/Unlimited Miles Limited Warranty (Parts Only). Please see ACDelco.com for more details|24 Months/40,000 Kilometers Limited Warranty (Parts Only). Please see ACDelcocanada.com for more details |
| Harmonized Tariff Code (HTS) | 8708305030 |
| Country of Origin (Primary) | CN |
| Warranty Special UOM | TX |
| UPC | 00707773952375 |
Fits Vehicles
- Sterling Truck Bullet 45 (2008-2010)
- Sterling Truck Bullet 55 (2008-2010)
- Ram 4500 (2011-2012)
- Ram 5500 (2011-2012)
- Dodge Ram 4500 (2008-2010)
- Dodge Ram 5500 (2008-2010)
- IC Corporation AE School Bus (2015)
- IC Corporation AC Commercial Bus (2012-2016)
A true OEM auto parts brand for GM and non-GM vehicles, ACDelco® offers a wide portfolio of parts designed to keep vehicles on the road longer. These parts work precisely and fit perfectly because they are designed, engineered, tested, and backed by General Motors. But ACDelco also carries aftermarket components that go through the same 18-step quality approval process as the OE parts. Whether customers choose OE or aftermarket, they’d get the same reliable performance, precise engineering, and superior reliability for years to come. ACDelco’s expansive product portfolio includes alternators, filters, batteries, brakes, belts and hoses, oil and fluids, and suspension parts. These products are made to meet GM and non-GM vehicles’ ever-evolving powertrain, collision, maintenance, and repair needs.
California residents see Prop 65 Warning(s)
Don't know your part number?
Take a photo and we'll identify it!
