Need help? We're here!
(888) 312-8812 Login SignupA-1 CARDONE 19-B7110 Brake Caliper
Tap to view 4 more
$9299
+$80.00 core deposit
Total price w/ core: $172.99
In Stock
Get it by Wednesday, Jun 17
A-1 CARDONE 19-B7110 Part Description
Manufacturer
Product Description
Brake Caliper
Application Summary
BMW 228i 2016-14, 228i xDrive 2016-15, 230i 2021-17, 230i xDrive 2021-17, 320i 2018-13, 320i xDrive 2018-13, 328d 2018-14, 328d xDrive 2018-14, 328i 2016-13, 328i GT xDrive 2016-14, 328i xDrive 2016-13, 330e 2018-16, 330i 2018-17, 330i GT xDrive 2019-17, 330i xDrive 2019-17, 428i 2016-14, 428i Gran Coupe 2016-15, 428i xDrive 2016-14, 428i xDrive Gran Coupe 2016-15, 430i 2020-17, 430i Gran Coupe 2020-17, 430i xDrive 2020-17, 430i xDrive Gran Coupe 2020-17
Features & Benefits
- Pistons are durable, resistant to cracking or pitting and handle great loads.
- Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
- Mounting bracket is included where applicable for a hassle-free installation.
- Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
- New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
- New bleeder screws provide trouble-free bleeding and a positive seal.
- New washers are included where applicable for a proper seal.
- A plastic cap plug protects every brake port thread to ensure trouble-free installation.
- New stainless steel hardware clips and new mounting pins are included where applicable.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Caliper, Brake Caliper, Disc Brake Caliper, Unloaded Caliper, Unloaded Brake Caliper, Power Brake Caliper, Hydraulic Disc Brake Caliper, Brakes
A-1 CARDONE 19-B7110 Specifications
Product Attributes
| Inlet Port Size | 0.39 |
| Piston Quantity | 1 |
| Piston Material | Steel |
| Package Contents | Caliper; Instruction Sheet; Bracket; Hardware Kit |
| Bleeder Port Size | M10x1.0 |
| Brake Caliper Finish | Oil Emulsion |
| Installation Hardware Included | Yes |
| Pads Included | No |
| Mounting Bolts Included | No |
| Product Condition | Remanufactured |
| E-waste | No |
| Piston Size (OD) (mm) | 41.99 |
| Piston Size (OD) (in) | 1.653 |
| FAQs | What type of grease is used on floating caliper mounting pins? |
| Features and Benefits | Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance. |
| Caliper Color | Gray |
| Abutment Clips Included | No |
| Anti-Rattle Spring Included | Yes |
| Bleeder Screw Included | Yes |
| Bleeder Screw Quantity | 1 |
| Bracket Included | Yes |
| Disc Brake Caliper Casting Material | Cast Iron |
| Caliper Color | Gray |
| Caliper Finish | Oil Emulsion |
| Caliper Slides Included | Yes |
| Caliper Type | Floating |
| Casting Number | 20-300 |
| Grade Type | Regular |
| Inlet Fitting Type | Banjo |
| Inlet Thread Size | M10x1.0 |
| Mounting Bolt Included | No |
| Mounting Bracket Included | Yes |
| Mounting Hardware Included | Yes |
| Mounting Hole Diameter | 18.38236 MM |
| Mounting Hole Diameter | 0.724 IN |
| 9543 | 0.724 IN |
| 9543 | 18.38236 MM |
| Pad Wear Sensor Included | No |
| Pads Included | No |
| Piston Diameter | 1.653 IN |
| Piston Diameter | 41.9862 MM |
| Piston Material | Steel |
| Piston Quantity | 1 |
| Bleeder Screw Cap Included | No |
| Rust Resistant Coating | Yes |
| Dust Boots Included | Yes |
| Mounting Hole Thread Size | M12X1.5 |
| Bleeder Thread Size | M10x1.0 |
| Inlet Port Size | 10.00366 MM |
| Inlet Port Size | 0.394 IN |
| Contains Electronic Components | No |
| Does it require SDS | No |
| Is Item A Chemical | No |
| Is Or Contains A Battery | No |
| Is Or Contains A Bulb | No |
| Is Prop Sixty Five Affected | No |
| Is the item CARB affected | No |
| FAQ_Q1 | Can I switch out a Phenolic Piston Caliper for a Steel Piston Caliper or vice versa? |
| FAA_A1 | Not recommended. The O.E. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle. It is recommended that the installer follow the manufacturer's recommendations. |
| FAQ_Q2 | What type of fluid should I use: DOT 3, DOT 4, or DOT 5? |
| FAA_A2 | As a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container. |
| FAQ_Q3 | Car pulls to one side during braking. Why? |
| FAA_A3 | Inspect both calipers for binding or sticky slides or pins. Also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation. |
| FAQ_Q4 | Brakes squeal all of the time. What's causing the squeal? |
| FAA_A4 | Brake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish. |
| FAQ_Q5 | Could calipers be the cause of a low brake pedal? |
| FAA_A5 | A symptom of a low brake pedal is usually caused by air in the system, misadjusted rear brake shoes, deteriorated brake hose(s) or a defective master cylinder. |
| FAQ_Q6 | What type of grease is used on floating caliper mounting pins? |
| FAA_A6 | A silicone grease is used on floating caliper mounting pins. |
| FAQ_Q7 | Do all of your Calipers come with the new hardware and a mounting bracket for installation? |
| FAA_A7 | New hardware is included with all of our Calipers however the mounting bracket is an added option depending on part number and application. Mounting Brackets are also sold separately for most applications. |
| Inlet Thread Size | M10x1.0 |
| Mounting Hole Thread Diameter | 0.724 IN |
| Mounting Hole Thread Diameter | 18.38236 MM |
Additional Information
| Remanufactured Part | Y |
| Warranty Distance | 24000 |
| Warranty Distance UOM | DH |
| Warranty Special UOM | TX |
| Warranty Time | 24 |
| Warranty Time UOM | MO |
| Country of Origin (Primary) | MX |
| Harmonized Tariff Code (Schedule B) | 8708300050 |
| Harmonized Tariff Code (HTS) | 8708305090 |
| Canadian Harmonizing Tariff Code | 8708309920 |
| UPC | 00884548119314 |
A-1 CARDONE 19-B7110 Cross References
| Brand | Part Number |
|---|---|
| BMW | 34216850857, 34216850857 |
| CENTRIC | 141.34636 |
A-1 CARDONE 19-B7110 Fits Vehicles
- BMW 330i xDrive (2017-2019)
- BMW 430i xDrive Gran Coupe (2017-2020)
- BMW 430i xDrive (2017-2020)
- BMW 230i xDrive (2017-2021)
- BMW 430i Gran Coupe (2017-2020)
- BMW 230i (2017-2021)
- BMW 330i (2017-2018)
- BMW 430i (2017-2020)
- BMW 330i GT xDrive (2017-2019)
- BMW 330e (2016-2018)
- BMW 228i xDrive (2015-2016)
- BMW 428i xDrive Gran Coupe (2015-2016)
- BMW 428i Gran Coupe (2015-2016)
- BMW 328d xDrive (2014-2018)
- BMW 328d (2014-2018)
- BMW 228i (2014-2016)
- BMW 328i GT xDrive (2014-2016)
- BMW 428i xDrive (2014-2016)
- BMW 428i (2014-2016)
- BMW 320i (2013-2018)
- BMW 320i xDrive (2013-2018)
- BMW 328i xDrive (2013-2016)
- BMW 328i (2013-2016)
A-1 CARDONE 19-B7110 Customer Reviews
No reviews yet
Be the first to review this product!
A-1 CARDONE 19-B7110 Manufacturer Information
A-1 Cardone Ind.® is a leading manufacturer and distributor of automotive parts and accessories, including master cylinders, clutches, calipers, and other braking system components. Its comprehensive range of products is made using the highest quality materials and the most advanced technology to ensure reliable performance, safety, and reliability. The company traces back its roots more than 35 years ago when Michael Cardone, Sr. remanufactures his first product: the windshield wiper motor. From then on, the name A-1 Cardone has been a go-to brand of automotive enthusiasts and fleet owners when it comes to new and remanufactured products that offer not just reliability but also long-lasting service.
A-1 CARDONE 19-B7110 Questions & Answers
No questions yet
Be the first to ask a question about this product!
California residents see
