REDNECK TRAILER part description

Dexter 10" x 2-1/4" Hub & Drum W/ 5 on 5" Bolt Pattern For 3,500lb Axles

Dexter hub & drum kits come with some of your main components like the inner and outer bearings. There is no need to worry about the races as they are already pressed into the hub for you. You will also get the grease seal, grease cap, and wheel nuts for the hub. This hub & drum is designed for use with a #84 spindle. Each hub has a 1,750lb capacity. Spindle nut and spindle washer sold separately.

Items in Kit:

  • 1 L68149 Inner Bearing (1.378" ID)
  • 1 L44649 Outer Bearing (1.063" ID)
  • 1 L44610 Outer Race (Already Pressed In) 1.98" OD
  • 1 L68111 Inner Race (Already Pressed In) 2.361" OD
  • 1 10-19 Grease Seal (1.719" x 2.565")
  • 1 46749 Grease Cap (1.986" OD)
  • 5 X1023R Coned Wheel Nuts
  • 1 5 on 5" Hub & Drum
  • 1,750lb Capacity Per Hub
  • Use with a 10" x 2-1/4" brake

Please refer to the diagram Image for these measurements



To determine the bolt circle on hubs or wheels with an odd number of bolt holes, measure from outside to center of the studs across the pattern(bolt patterns are always measured in inches). Example: If you were to number the studs 1, 2, 3, then you would measure from the outside of stud 1 to the center of stud 3.

Redneck Trailer® has been setting the standard in trailer parts since 1979. During its first two years, it manufactured gooseneck trailers that were painted red, which is where its name was derived. It then shifted to distributing trailer parts instead of producing trailers in response to the customers' need for a reliable source of trailer parts in 1981. Since the initial opening of the Redneck Trailer Supplies warehouse in Springfield, MO, the company has grown to include 20 branch locations in the United States. It has cemented itself as a leading supplier of trailer parts and accessories across the US and beyond.


 

Don't know your part number?

Take a photo and we'll identify it!

Recommended Products

More from REDNECK TRAILER (Browse all)