DEXTER AXLE part description

Dexter Hub W/ 6 on 5.5" Bolt Pattern For 3,500lb Axles

There is no need to worry about the races as they are already pressed into the hub for you. This hub is designed for use with a #84 spindle. Each hub has a capacity of 1,750 lbs. The bearings, grease seal, grease cap, wheel nuts, spindle nut, and spindle washer sold separately. Kit with hardware is available.

  • Hub only
  • 6 on 5.5" Bolt pattern
  • 1 L44610 Outer Race (Already Pressed In) 1.98" OD
  • 1 L68111 Inner Race (Already Pressed In) 2.361 OD
  • Uses L68149(1.378" ID) and L44649(1.063" ID) bearings(sold separately)

Please refer to the diagram Image for these measurements



To determine the bolt circle on hubs or wheels with an even number of studs, measure center-to-center of studs directly across from each other on the diameter(bolt patterns are always measured in inches). Example: 8 on 6 1/2 would mean 8 studs with 6 1/2” center-to-center diameter.

DEXTER AXLE 84655 Cross Reference

We have 1 alternatives for the 84655 by DEXTER AXLE:

For more than 50 years, Dexter Axle® has been a global leader in developing and manufacturing safe and reliable trailer components for recreation vehicles, utility trailers, and specialty trailers. It is also a trusted brand in agricultural, manufactured housing, and marine markets. Headquartered in Elkhart, Indiana, and established in 1960, Dexter owns 14 manufacturing facilities across the US and Canada. Metallurgical evaluations and computer-equipped tests are also done to ensure remarkable product quality and performance. An ISO 9001:2015 certified brand, Dexter is still propelled by the same principles it has since it was founded: superior quality, constant improvement, and outstanding customer service.

Don't know your part number?

Take a photo and we'll identify it!

Recommended Products

More from DEXTER AXLE (Browse all)