Tap to view 2 more
ACDelco 9746T - Spark Plug Wire Set - Solid Boot, Silicone Insulation, 10 kOhm, Snap Lock
$7449
MSRP: $98.01
Save: $23.52
In stock
limited availability at this price!
Pay over 3-12 months with 
. Learn more
. Learn more
ACDELCO part description
Professional™ Spark Plug Wire
Product Attributes
| Outside Diameter | 7 mm |
| Boot Type | Solid |
| Distributor Coil End Terminal Type | Snap Lock |
| Spark Plug End Terminal Type | Snap Lock |
| Distributor Coil End Boot Type | Silicone Straight |
| Insulation Material | Silicone Rubber |
| Resistance | 10 kOhm |
| Noise Suppression Type | Yes |
| Wire Separators Included | No |
| Universal Or Specific Fit | Specific |
| Spark Plug Boot Material | Silicone Rubber |
| Spark Plug End Boot Color | Black |
| Coil End Boot Color | Black |
| Spark Plug End Boot Quantity Angled | 4 |
| Spark Plug End Boot Quantity Straight | 2 |
| Finish | Black |
| Finish | Black |
| Maximum Wire Length (In) | 28.2 |
| Maximum Wire Length (In) | 28.2 |
| Maximum Wire Length (mm) | 716 |
| Wire Core Material | Fiberglass Reinforced Latex Graphite |
| Wire Core Material | Fiberglass Reinforced Latex Graphite |
| Insulation Outside Diameter | 0.28 IN |
| Weight (lb) | 1.03 lb |
| Height (in) | 6 in |
| Outside Diameter | 7 MM |
| Insulation Outside Diameter | 7 MM |
| Width (in) | 10 in |
| Length (In) | 28.2 IN |
| Maximum Wire Length (mm) | 716 mm |
| Length (mm) | 716 mm |
| Distributor Coil End Boot Degree | 180 DD |
| Resistance | 10000 82 |
| Product Description | ACDelco Professional Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are a high quality replacement for many vehicles on the road today. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plugs. These premium aftermarket replacement components are manufactured to meet your expectations for fit, form, and function. ⚠<b> WARNING:</b> Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Good Maintenance Practices - Section 1 - Bullet 1 | Before purchasing and installing a spark plug wire, make sure they are the correct size and fit for your vehicle. |
| Insulation Color | Black |
| BOOT COLOR | Black |
| Core Material | Fiberglass Reinforced Latex Graphite |
| Spark Plug End Boot Material | Hi Temp Silicon |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 4 | Illuminated Check Engine light |
| Good Maintenance Practices - Section 1 - Bullet 3 | Keep plug wires free from contact with other engine components. |
| Features & Benefits - Bullet 3 | Manufactured to meet expectations for fit, form, and function |
| Programming Required | No |
| Features & Benefits - Bullet 1 | Professional, premium aftermarket replacement |
| Features & Benefits - Bullet 2 | Provides the performance and dependability you expect from ACDelco |
| Good Maintenance Practices - Section 1 - Bullet 5 | Regularly inspect your spark plug wires for signs of damage or wear, and replace them if signs of damage are found. |
| Good Maintenance Practices - Section 1 - Bullet 4 | Reinstall plug wires in the original position, using correct routing and utilizing appropriate hold downs. |
| Good Maintenance Practices - Section 1 - Bullet 2 | Remove the wire by holding the boot, not the wire. |
| FAQ - Question 1 | Should grease be installed into a spark plug boot? |
| Spark Plug End Boot Degree | 90 DD |
| FAQ - Answer 1 | Yes. The use of dielectric grease in the boot helps prevent spark flashover and allows easier boot removal in the future. |
| 8979 | 22 IN |
| Wire 1 Length | 558.8 MM |
| 8980 | 22 IN |
| Wire 2 Length | 558.8 MM |
| 8981 | 22 IN |
| Wire 3 Length | 558.8 MM |
| 8982 | 24 IN |
| Wire 4 Length | 609.6 MM |
| 8983 | 24 IN |
| Wire 5 Length | 609.6 MM |
| 8984 | 28 IN |
| Wire 6 Length | 711.2 MM |
| Coil Wire Length | 406.4 MM |
| 8987 | 16 IN |
Additional Information
| Warranty Special | 24 Months/Unlimited Miles Limited Warranty (Parts Only). Please see ACDelco.com for more details|No Warranty |
| Harmonized Tariff Code (HTS) | 8544300000 |
| Country of Origin (Primary) | MX |
| Country of Origin 3 | PL |
| Country of Origin 2 | US |
| Warranty Special UOM | TX |
| UPC | 00707773322185 |
A true OEM auto parts brand for GM and non-GM vehicles, ACDelco® offers a wide portfolio of parts designed to keep vehicles on the road longer. These parts work precisely and fit perfectly because they are designed, engineered, tested, and backed by General Motors. But ACDelco also carries aftermarket components that go through the same 18-step quality approval process as the OE parts. Whether customers choose OE or aftermarket, they’d get the same reliable performance, precise engineering, and superior reliability for years to come. ACDelco’s expansive product portfolio includes alternators, filters, batteries, brakes, belts and hoses, oil and fluids, and suspension parts. These products are made to meet GM and non-GM vehicles’ ever-evolving powertrain, collision, maintenance, and repair needs.
California residents see Prop 65 Warning(s)
Don't know your part number?
Take a photo and we'll identify it!
