Electrical & Lighting Engine & Drivetrain Brakes, Suspension, & Steering Body Tire & Wheel Other Parts & Supplies Top Searches

GM 15104801 Engine Oil Cooler Inlet Hose Kit with Nut, Seals, and Connector

(0)
GM 15104801 Engine Oil Cooler Hose Assembly Engine Oil Cooler Inlet Hose Kit with Nut, Seals, and Connector
GM

Out of Stock

We cannot fulfill orders for this part at this time. Please check back later or request a stock notification to receive an email.

We may have similar parts for sale. Search Alternatives >

GM 15104801 Part Description

Manufacturer

GM

Engine Oil Cooler Inlet Hose Kit with Nut, Seals, and Connector

GM 15104801 Specifications

Product Attributes

Hose Inside Diameter (in) 0.626 in
Hose Outside Diameter 0.866 IN
Weight (lb) 1.39 lb
Height (in) 3.3 in
Width (in) 8.7 in
Hose Inside Diameter (mm) 15.9 mm
Length 54.1 IN
Length 1044 MM
FAQ - Question 1 Are oil coolant hoses different from regular rubber hoses?
Good Maintenance Practices - Section 1 - Bullet 2 Avoid kinks or bends in the hose assembly.
Good Maintenance Practices - Section 1 - Bullet 3 Be sure hose connections are tight.
Good Maintenance Practices - Section 1 - Bullet 1 Before purchasing and installing an engine oil cooler hose assembly, make sure it is the correct size and fit for your vehicle.
Signs of Wear & Troubleshooting - Section 1 - Bullet 1 Cracks in hose
Features & Benefits - Bullet 3 GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Features & Benefits - Bullet 2 GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
Product Description GM Genuine Parts Engine Oil Cooler Hose Assembly are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE). &#9888;<b> WARNING:</b> Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Features & Benefits - Bullet 4 GM regularly updates production and service part designs to integrate new materials and technologies
Good Maintenance Practices - Section 1 - Bullet 4 Have your vehicle inspected as soon as possible if the 'Service Engine Soon' light illuminates.
Good Maintenance Practices - Section 1 - Bullet 5 Have your vehicle inspected immediately if the 'Service Engine Soon' light flashes rapidly, as this could indicate an engine misfire condition which may damage your engine and/or engine emission components.
End 2 Type Jiffy-Tite Flare
Signs of Wear & Troubleshooting - Section 1 - Bullet 3 Low oil levels
End 1 Type Male Threaded
Mounting Bracket Included No
Clamps Included No
Programming Required No
Good Maintenance Practices - Section 1 - Bullet 6 Regularly inspect assembly for signs of damage or wear, and replace them if signs of damage are found.
FAQ - Question 2 Should gaskets and/or O-rings be replaced when the hose assembly is replaced?
Signs of Wear & Troubleshooting - Section 1 - Header Signs of wear for engine oil cooler hose assembly include but are not limited to:
Features & Benefits - Bullet 1 Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
Materials Steel, Rubber
Signs of Wear & Troubleshooting - Section 1 - Bullet 2 Visible leaks or fluid level loss
FAQ - Answer 2 Yes. Gaskets or O-rings should be replaced when the assembly is replaced.
FAQ - Answer 1 Yes. They are designed for high temperatures and oil transfer.
Color Black, Silver

Additional Information

Warranty Special 24 Months/Unlimited Miles Limited Warranty (Parts Only). Please see ACDelco.com for more details|36 Months/60,000 Kilometers Limited Warranty (Parts Only). Please see ACDelcocanada.com for more details
Harmonized Tariff Code (HTS) 8708998180
Country of Origin (Primary) CA
Warranty Special UOM TX
UPC 00707773696729

GM 15104801 Cross References

BrandPart Number
DORMAN625-113
SUNSONG5801251

GM 15104801 Customer Reviews

No reviews yet

Be the first to review this product!

Write a Review

GM 15104801 Engine Oil Cooler Hose Assembly Engine Oil Cooler Inlet Hose Kit with Nut, Seals, and Connector

GM 15104801

Engine Oil Cooler Inlet Hose Kit with Nut, Seals, and Connector

*
*

Maximum 100 characters.

Maximum 500 characters.

Order number must be in the format F followed by 9 digits (e.g., F100000000)

*

You can upload up to 3 images to help illustrate your review. Supported formats: JPG, PNG, GIF, WebP

* Required fields

Review Guidelines

  • Focus on the product's performance and quality
  • Include details about installation and usage
  • Be honest and constructive in your feedback
  • Avoid personal information or inappropriate content

Please complete the reCAPTCHA verification to submit your review.

GM 15104801 Questions & Answers

No questions yet

Be the first to ask a question about this product!

California Proposition 65 Warning California residents see

Recommended Products

More from GM

(Browse all)