COLE HERSEE 24106 - 24106 - Continuous Duty SPST Series

Cole Hersee intermittent and continous solenoids provide safe, dependable control of electrical systems on all type of DC low voltage vehicles. In addition, they are ideal for marine applications and for forward and reverse systems in golf carts, garden tractors, fork lift trucks and winch operation.
Solenoids are relays which are commonly used to remotely switch a heavier current. By using a solenoid, the amount of heavy wiring needed to power the load is reduced, since the control circuit mounted inside the cab typically utilizes a smaller wire gauge.
Housing are available in plated steel, phenolic or plasticized steel. A latching solenoid can act as a remote disconnect switch.


All products listed in this section can be found in Section H of the Cole Hersee D-275 CATALOG.

• 85A Normally Open contactsA pair of devices that touch or come apart at the point where the switch throw makes or breaks the circuit. Silver contacts are common because of their low conductivity and low electrical resistance. Many Cole Hersee switches have silver contacts., spstSingle Pole, Single Throw. Circuitry which describes a switch. Single Pole means that this switch controls one circuit. Single Throw means that this switch has only two positions - and those are highly likely to be On and Off., One circuit: Off - On
• Housing: Plated steel case.
• Studs: Copper 5/16" -24 thread, hexnuts and lockwashers included. Coil, ignition and ground terminals: Steel 10-32 thread, hexnuts and lockwashers included.
• Bracket mounting holes 5/16" x 19/32" (7.9 x 15.1) on 2 13/64" centers (56.0mm).

Property	Value
Description	12V Grounded Continuous Duty Solenoid
Rating	85A at 12V DC
Housing	Plated steel
NO/NC	Normally open

COLE HERSEE 24106 Cross Reference

We have 2 alternatives for the 24106 by COLE HERSEE:

• VELVAC 090054
• CHS24106