ACDelco 18R1378C - CALIPER ASMFRT B (SLP)
$12299
+$32.00 Core Deposit
Total price w/ core: $154.99
In stock
limited availability at this price!
Pay over 3-12 months with 
. Learn more
. Learn more
ACDELCO part description
CALIPER ASMFRT B (SLP)
Product Description
Front Disc Brake Caliper Assembly
Product Attributes
| Height (in) | 5.62 in |
| Width (in) | 6.44 in |
| Weight (lb) | 12 lb |
| Length (In) | 12.94 IN |
| Product Description | ACDelco Gold (Professional) Remanufactured Loaded Disc Brake Calipers are a high quality alternative to Original Equipment (OE) parts. These calipers use both aluminum and iron castings. These loaded calipers contain Ethylene Propylene (EPDM) rubber components to provide superior resistance to heat, corrosion, and leakage. Remanufacturing disc brake calipers is an automotive industry practice that involves disassembly of existing units, and replacing components that are most prone to wear with new components. Damaged and obsolete parts are replaced and are end of line tested to ensure they perform to ACDelco specifications. In addition, remanufacturing returns components back into service rather than processing as scrap or simply disposing of them. ACDelco Gold (Professional) Remanufactured Loaded Disc Brake Calipers are developed with Professional brake pads already attached - no assembly is required. Also included are bleeder screws, copper sealing washers, hardware, and mounting brackets for easy installation. These loaded disc brake calipers will provide the same performance, durability, and service life you expect from ACDelco. ⚠<b> WARNING:</b> Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Caliper Piston Quantity | 2 |
| Caliper Type | Floating |
| FAQ - Question 3 | Do I have to replace my disc brake calipers after a certain amount of time? |
| FAQ - Answer 2 | Yes, ACDelco also offers GM OE disc brake calipers. |
| FAQ - Question 2 | Does ACDelco offer other grades of disc brake calipers? |
| FAQ - Answer 1 | No, but it is a good idea to inspect them for wear-out, cracking, leaking etc. |
| FAQ - Question 1 | Do I have to replace all my brake parts when replacing my disc brake calipers? |
| Good Maintenance Practices - Section 2 - Bullet 4 | Parking brake adjustments (as needed). |
| Good Maintenance Practices - Section 2 - Bullet 3 | Inspection of wheel bearings and grease seals. |
| Good Maintenance Practices - Section 2 - Bullet 2 | Inspection of brake lining and pads for wear or contamination by brake fluid or grease. |
| Good Maintenance Practices - Section 2 - Bullet 1 | Inspection of the brake hoses for brittleness or cracking. |
| Good Maintenance Practices - Section 2 - Header | The following should be conducted by a qualified technician: |
| Good Maintenance Practices - Section 1 - Bullet 4 | Check the thickness of your brake pads. |
| Good Maintenance Practices - Section 1 - Bullet 3 | Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary). |
| Good Maintenance Practices - Section 1 - Bullet 2 | Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required. |
| Good Maintenance Practices - Section 1 - Bullet 1 | Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations. |
| Good Maintenance Practices - Section 1 - Header | The following inspections and maintenance procedures can help prevent potential brake problems: |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 5 | Brake pedal pulsation (not to be confused with normal ABS operation). |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 4 | Vehicle pulls to the left or right when brakes are applied. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 3 | A low or sinking brake pedal. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 2 | Difficulty stopping the vehicle. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 1 | Brake warning light is on. |
| Signs of Wear & Troubleshooting - Section 1 - Header | Signs that your disc brake calipers may need to be replaced are: |
| Features & Benefits - Bullet 3 | Pre-lubed and loaded with quality friction pads for smooth operation |
| Features & Benefits - Bullet 2 | Cast iron and aluminum specifications; no extra stress on the brake boosting mounting |
| Features & Benefits - Bullet 1 | Pressure tested to ensure safe and confident braking |
| FAQ - Answer 3 | No, but it is a good idea to inspect them at every tire rotation. |
| Disc Brake Caliper Casting Material | Cast Iron |
Additional Information
| Warranty Special | 24 Months/Unlimited Miles Limited Warranty (Parts Only). Please see ACDelco.com for more details|24 Months/40,000 Kilometers Limited Warranty (Parts Only). Please see ACDelcocanada.com for more details |
| Harmonized Tariff Code (HTS) | 8708305090 |
| Country of Origin (Primary) | MX |
| Warranty Special UOM | TX |
| UPC | 00193468907902 |
A true OEM auto parts brand for GM and non-GM vehicles, ACDelco® offers a wide portfolio of parts designed to keep vehicles on the road longer. These parts work precisely and fit perfectly because they are designed, engineered, tested, and backed by General Motors. But ACDelco also carries aftermarket components that go through the same 18-step quality approval process as the OE parts. Whether customers choose OE or aftermarket, they’d get the same reliable performance, precise engineering, and superior reliability for years to come. ACDelco’s expansive product portfolio includes alternators, filters, batteries, brakes, belts and hoses, oil and fluids, and suspension parts. These products are made to meet GM and non-GM vehicles’ ever-evolving powertrain, collision, maintenance, and repair needs.
California residents see Prop 65 Warning(s)
Don't know your part number?
Take a photo and we'll identify it!
