ACDELCO part description

Disc Brake Rotor, Front, Slotted, Vented, for 2015-2017 Subaru Legacy

Product Description

Front Brake Rotor

Product Attributes

Center Hole Diameter 58 MM
Discard Thickness 1.024 IN
Height (in) 2.232283465 in
Bolt Circle Diameter (in) 4.5 in
Bolt Hole Quantity 5
Disc Finish Coated
Center Hole Diameter 2.283 IN
Discard Thickness 26 MM
Nominal Thickness 28 MM
Height (mm) 56.7 mm
Bolt Circle Diameter (mm) 114.3 mm
Inside Diameter 176 MM
Outside Diameter 293.5 MM
Mounting Bolt Hole Circle Diameter 4.5 IN
Product Description ACDelco Gold (Professional) Disc Brake Rotors are a high quality alternative to Original Equipment (OE) parts. They feature a thickness variation that is less than 0.0004 to minimize pedal pulsation, noise, and help to extend brake pad life. These rotors meet the SAE standard for structural integrity with OE matched G3000 qualified material delivering guaranteed performance. Also, no machining is required. ACDelco Gold (Professional) Disc Brake Rotors are ready to be installed right out of the box. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional. &#9888;<b> WARNING:</b> Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Good Maintenance Practices - Section 1 - Bullet 2 Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 1 Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 4 Check the thickness of your brake pads.
FAQ - Question 1 Does ACDelco offer other grades of brake rotors?
Material ES100E
Features & Benefits - Bullet 3 Follows original manufacturers' designs for dispersing heat, helping to prolong pad and rotor life while reducing noise and vibration
Construction Full Cast
Features & Benefits - Bullet 2 Independently tested with Noise/Vibration/Harshness (NVH) and durability/wear testing; resulting in high quality and reliable products
Good Maintenance Practices - Section 1 - Bullet 3 Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Features & Benefits - Bullet 1 Inspected for balance; resulting in smooth brake operation and noise reduction
Good Maintenance Practices - Section 2 - Bullet 2 Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 1 Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 3 Inspection of wheel bearings and grease seals.
Features & Benefits - Bullet 6 Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
Programming Required No
Good Maintenance Practices - Section 2 - Bullet 4 Parking brake adjustments (as needed).
Features & Benefits - Bullet 5 Premium aftermarket replacement part
Grade Type Regular
Surface Type Smooth
Features & Benefits - Bullet 4 Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
Good Maintenance Practices - Section 1 - Header The following inspections and maintenance procedures can help prevent potential brake problems:
Good Maintenance Practices - Section 2 - Header The following should be conducted by a qualified technician:
Hat Finish Turned
Inside Diameter 6.929 IN
Signs of Wear & Troubleshooting - Section 1 - Bullet 4 Vehicle pulls to the left or right when brakes are applied.
Signs of Wear & Troubleshooting - Section 1 - Bullet 5 Visible ridges or deep grooves on the rotor surface.
Rust Resistant Coating Yes
Slotted Yes
FAQ - Answer 1 Yes, ACDelco also offers GM OE brake rotor and Advantage brake rotors.
Mounting Bolt Hole Circle Diameter 114.3 MM
Mounting Bolt Hole Diameter 0.512 IN
Mounting Bolt Hole Diameter 13 MM
Mounting Bolt Hole Quantity 5
Nominal Thickness 1.102 IN
Outside Diameter 11.555 IN
Overall Height 2.232 IN
Overall Height 56.7 MM
Solid Or Vented Type Rotor Solid
Stud/Lug Hole Quantity 5
Conventional Or Drum-In-Hat Type Rotor Conventional
ABS Tone Ring Included No

Additional Information

Warranty Special 24 Months/Unlimited Miles Limited Warranty (Parts Only). Please see ACDelco.com for more details|24 Months/40,000 Kilometers Limited Warranty (Parts Only). Please see ACDelcocanada.com for more details
Harmonized Tariff Code (HTS) 8708305030
Country of Origin (Primary) CN
Warranty Special UOM TX
UPC 00808709614005

A true OEM auto parts brand for GM and non-GM vehicles, ACDelco® offers a wide portfolio of parts designed to keep vehicles on the road longer. These parts work precisely and fit perfectly because they are designed, engineered, tested, and backed by General Motors. But ACDelco also carries aftermarket components that go through the same 18-step quality approval process as the OE parts. Whether customers choose OE or aftermarket, they’d get the same reliable performance, precise engineering, and superior reliability for years to come. ACDelco’s expansive product portfolio includes alternators, filters, batteries, brakes, belts and hoses, oil and fluids, and suspension parts. These products are made to meet GM and non-GM vehicles’ ever-evolving powertrain, collision, maintenance, and repair needs.

Don't know your part number?

Take a photo and we'll identify it!

Recommended Products

More from ACDELCO (Browse all)