Name: ACDelco 17D1328MHSV ACDELCO 17D1328MHSV -
SKU: 17d1328mhsv
Price: 84.49 USD
Availability: InStock

ACDELCO part description

Product Description

Front Brake Pad Set

Product Attributes

Height (in)	4 in
Width (in)	6.3 in
Weight (lb)	8.54 lb
Length (In)	11.5 IN
Product Description	ACDelco Gold (Professional) Performance (Fleet/Police) Semi-Metallic Disc Brake Pads are a high quality alternative to Original Equipment (OE) parts. These brake pads are formulated with steel strands to provide strength and conduct heat away from the rotor's surface while offering premium braking power. They are engineered to help resist corrosion and premature wear. They offer exceptional performance and include noise-dampening shims where applicable. These brake pads are specifically designed to meet the demands of police and fleet vehicles. ACDelco Gold (Professional) Performance (Fleet/Police) Semi-Metallic Brake Pads are ready to be installed right out of the box - no curing required. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional. ⚠<b> WARNING:</b> Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Signs of Wear & Troubleshooting - Section 1 - Bullet 4	Braking causes the pedal and/or steering wheel to pulsate/vibrate (not to be confused with normal ABS operation).
Good Maintenance Practices - Section 1 - Bullet 2	Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Features & Benefits - Bullet 6	Ceramic, semi-metallic, and organic formulas provide safety and reliability for a range of vehicle applications
Good Maintenance Practices - Section 1 - Bullet 1	Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 4	Check the thickness of your brake pads.
FAQ - Question 1	Do I have to replace all my brake parts when replacing my brake pads?
FAQ - Question 2	Do I have to replace my brake pads after a certain amount of time?
Features & Benefits - Bullet 7	Friction material is integrally molded to backing plate for bond integrity
Good Maintenance Practices - Section 1 - Bullet 3	Inspect the brake lines for rust, punctures or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 2 - Bullet 2	Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 1	Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 3	Inspection of wheel bearings and grease seals.
Features & Benefits - Bullet 10	Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
Friction Material Composition	Metallic
FAQ - Answer 1	No, but it is a good idea to inspect them for wear-out, cracking, leaking etc.
FAQ - Answer 2	No, but it is a good idea to inspect your brake pads at each tire rotation.
Features & Benefits - Bullet 3	Nucap Retention System (NRS) backing plates used when possible for superior performance
Good Maintenance Practices - Section 2 - Bullet 4	Parking brake adjustments (as needed).
Grade Type	Performance
Features & Benefits - Bullet 9	Premium aftermarket replacement part
Features & Benefits - Bullet 2	Premium chamfers and slots match up with original equipment
Features & Benefits - Bullet 1	Rubberized adjustment clips for quiet operation
Features & Benefits - Bullet 8	Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
Features & Benefits - Bullet 5	Tested to SAE J2784 standards for braking effectiveness, along with Noise/Vibration/Harshness (NVH) and durability/wear testing for assurance of quality
Good Maintenance Practices - Section 1 - Header	The following inspections and maintenance procedures can help prevent potential brake problems:
Good Maintenance Practices - Section 2 - Header	The following should be conducted by a qualified technician:
Features & Benefits - Bullet 4	Utilize damped iron metallurgy to reduce noise, vibration, and heat
Signs of Wear & Troubleshooting - Section 1 - Bullet 5	Vehicle pulls to the left or right when brakes are applied.
Mounting Hardware Included	Yes
FMSI Number	D1328-8440
Inner Pad Height	2.760 in
Inner Pad Overall Thickness	0.725 IN
Inner Pad Width	8.440 in
Outer Pad Height	2.760 IN
Outer Pad Overall Thickness	0.725 in
Outer Pad Width	8.440 IN
Inner Pad Friction Material Thickness	18.415 MM
Inner Pad Friction Material Thickness (in)	0.725in
Outer Pad Friction Material Thickness	0.725 IN
Outer Pad Friction Material Thickness	18.415 MM

Additional Information

Warranty Special	24 Months/Unlimited Miles Limited Warranty (Parts Only). Please see ACDelco.com for more details\|36 Months/60,000 Kilometers Limited Warranty (Parts Only). Please see ACDelcocanada.com for more details
Harmonized Tariff Code (HTS)	8708305040
Country of Origin 3	CN
Country of Origin 2	IN
Country of Origin (Primary)	MX
Warranty Special UOM	TX
UPC	00808709691174

A true OEM auto parts brand for GM and non-GM vehicles, ACDelco® offers a wide portfolio of parts designed to keep vehicles on the road longer. These parts work precisely and fit perfectly because they are designed, engineered, tested, and backed by General Motors. But ACDelco also carries aftermarket components that go through the same 18-step quality approval process as the OE parts. Whether customers choose OE or aftermarket, they’d get the same reliable performance, precise engineering, and superior reliability for years to come. ACDelco’s expansive product portfolio includes alternators, filters, batteries, brakes, belts and hoses, oil and fluids, and suspension parts. These products are made to meet GM and non-GM vehicles’ ever-evolving powertrain, collision, maintenance, and repair needs.