ACDelco 15660 - High Capacity V-Belt
$3549
In stock
limited availability at this price!
Pay over 3-12 months with 
. Learn more
. Learn more
ACDELCO part description
Product Attributes
| Top Width | 0.41 in |
| Top Width | 10.0 mm |
| Effective Length | 1676 mm |
| Outside Circumference | 1691 mm |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 4 | Abrasion: wear along the side could indicate misalignment due to a failed tensioner. |
| Product Description | ACDelco Professional, premium aftermarket V-Belts serve as replacement belts for today's most demanding engine drives. Due to thermal forces, these variable notched belts actually tighten on the drive as they get hot. This results in improved belt performance by reducing tension, decay, and noise. These premium aftermarket replacement v-belts are manufactured to meet your expectations for fit, form, and function. ⚠<b> WARNING:</b> Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| FAQ - Question 3 | Are there steps I can take to ensure a longer automotive belt life? |
| Color | Black |
| FAQ - Question 5 | Can I use the same automotive belt for multiple uses? |
| Good Maintenance Practices - Section 1 - Bullet 6 | Check for proper belt tension after 500 to 1,000 miles following belt installation. Recheck often, at least twice a year or every 6,000 miles. |
| FAQ - Question 1 | Could an automotive belt tear during use? |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 5 | Cracking: older neoprene belts crack as they near the end of their life cycle and often need to be replaced. |
| Good Maintenance Practices - Section 1 - Bullet 1 | Do not use belt dressings to stop belt slippage or noise. These are oil based and may cause belt deterioration. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 6 | Engine stops or backfires. |
| Material | Fiber Loaded Rubber |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 2 | Glazing: shiny spots can indicate a slipping belt that isn't properly transferring power to accessories. |
| Features & Benefits - Bullet 2 | Has thermally active tensile cords that provide maintenance free performance when properly installed and tensioned |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 8 | Headlights dim while driving. |
| FAQ - Question 4 | Is there a way to repair a torn automotive belt? |
| Features & Benefits - Bullet 1 | Its fiber loaded rubber stock puts more flexibility along the length of the belt, yet gives the belt greater lateral stability in the pulley |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 9 | Loss of battery charge. |
| Features & Benefits - Bullet 3 | Manufactured with form ground to ensure precise top width and sidewall dimensional control for proper fit in the pulley as well as a smoother, quieter running belt |
| Good Maintenance Practices - Section 1 - Bullet 2 | Never twist a belt more than 90 degrees during inspection. This may damage the tensile cords and cause premature failure. |
| Top Cogged | No |
| FAQ - Answer 6 | No, remember the leading cause of belt failure is improper tension and misaligned pulleys. Improper tension will cause the belt to slip and you may notice a loss of performance from the air conditioning system as well as increased heat under the hood. High heat can lead to premature accessory failure. |
| FAQ - Answer 5 | No, use the belt in the way it's listed in the ACDelco belts and hoses catalog. |
| FAQ - Answer 4 | No, when the belt backing has been torn or cracked, the belt should be replaced. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 3 | Pilling: worn rubber can fill in grooves and cause noise, heat, vibration, and excessive wear. |
| Good Maintenance Practices - Section 1 - Bullet 3 | Replace serpentine belts every 60,000 - 100,000 miles. Check vehicle's owner's manual. |
| Good Maintenance Practices - Section 1 - Bullet 4 | Replace V-belts after 3 to 4 years, or every 36,000 to 48,000 miles. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 1 | Rubber Loss: (most common belt wear) a belt wear gauge measures rubber loss, which can result in reduced power transfer from the crank to the accessories. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 7 | The belt is producing a squealing noise. |
| Good Maintenance Practices - Section 1 - Bullet 5 | Use an approved tension gauge to check belt tension. |
| FAQ - Question 6 | Will a worn automotive belt affect gas mileage? |
| FAQ - Question 2 | Will I know immediately if an automotive belt tears? |
| FAQ - Answer 3 | Yes, the leading causes of belt failure are improper tension and misaligned pulleys. Both these conditions cause excessive heat which leads to belt failure. Have your belts checked every 3,000 miles for belt wear, proper tension, and pulley alignment. |
| FAQ - Answer 1 | Yes, this may be indicative of an alignment issue or a failed tensioner. |
| FAQ - Answer 2 | Yes, you may lose your power steering or stall out. Your car is not drivable when your drive belt fails. |
Additional Information
| Warranty Special | Limited Lifetime Warranty (Parts Only). Please see ACDelco.com for more details|Limited Lifetime Warranty as long as the original purchaser still owns the vehicle (Parts Only). Please see ACDelcocanada.com for more details |
| Harmonized Tariff Code (HTS) | 4010313000 |
| Country of Origin (Primary) | US |
| Warranty Special UOM | TX |
| UPC | 00021625252797 |
ACDELCO 15660 Cross Reference
We have 2 alternatives for the 15660 by ACDELCO:
Fits Vehicles
- Plymouth Suburban (1959, 1961)
- Plymouth Sport Wagon (1961)
- Plymouth Custom (1959, 1961)
- Plymouth Fleet Special (1961-1963)
- Plymouth Savoy (1959, 1961-1964)
- Plymouth Belvedere II (1965)
- Plymouth Belvedere (1959, 1961-1965)
- Plymouth Satellite (1965, 1972-1974)
- Plymouth Road Runner (1972-1974)
- Plymouth Fury III (1965, 1971-1974)
- Plymouth Fury II (1965, 1971-1974)
- Plymouth Fury I (1971-1974)
- Plymouth Gran Fury (1972-1977)
- Plymouth Trailduster (1977-1978)
- Plymouth Fury (1959, 1961-1965, 1971-1975, 1977-1978)
- Oldsmobile Deluxe 88 (1953-1954)
- Oldsmobile Golden Rocket 88 (1957)
- Oldsmobile 88 (1954, 1957)
- Oldsmobile Super 88 (1953-1954, 1957, 1961)
- Oldsmobile Starfire (1954, 1957, 1961)
- Oldsmobile Fiesta (1953, 1957, 1961)
- Oldsmobile Dynamic 88 (1961)
- Oldsmobile Classic 98 (1961)
- Oldsmobile 98 (1953-1954, 1957, 1961)
- Ford F-800 (1991)
- Ford F-700 (1991)
- Ford F-600 LPO (1991)
- Ford F-600 (1991)
- Fargo FL8 Pickup (1958)
- Fargo FL8 Panel Delivery (1958)
- Dodge W300 Pickup (1957)
- Dodge W200 Pickup (1957)
- Dodge W100 Pickup (1957)
- Dodge P420 Series (1958)
- Dodge P410 Series (1958)
- Dodge P320 Series (1958)
- Dodge P310 Series (1958)
- Dodge P300 Series (1958)
- Dodge D300 Pickup (1957-1958)
- Dodge D200 Pickup (1957-1958)
- Dodge D100 Pickup (1957-1958)
- Dodge Sierra (1959)
- Dodge Royal (1959)
- Dodge Custom (1959)
- Dodge Matador (1960)
- Dodge Seneca (1961)
- Dodge Pioneer (1961)
- Dodge Phoenix (1960-1961)
- Dodge Dart (1960-1962)
- Dodge 880 (1962-1964)
- Dodge 440 (1963-1964)
- Dodge 330 (1963-1964)
- Dodge Polara (1960-1965, 1971-1973)
- Dodge Charger (1972-1974)
- Dodge Coronet (1959, 1965, 1972-1976)
- Dodge W100 (1977)
- Dodge Royal Monaco (1975-1977)
- Dodge W300 (1977-1978)
- Dodge W200 (1977-1978)
- Dodge W150 (1978)
- Dodge Ramcharger (1977-1978)
- Dodge Monaco (1965, 1971-1978)
- Dodge D300 (1977-1978)
- Dodge D200 (1977-1978)
- Dodge D150 (1978)
- Dodge D100 (1977-1978)
- DeSoto Firesweep (1959)
- DeSoto Firedome (1959)
- DeSoto Fireflite (1959-1961)
- DeSoto DeSoto (1961)
- DeSoto Adventurer (1959-1961)
- Chrysler Saratoga (1959)
- Chrysler Windsor (1959, 1961)
- Chrysler Imperial (1959, 1964-1965, 1975)
- Chrysler Town & Country (1959, 1961-1965, 1975-1977)
- Chrysler Newport (1961-1965, 1975-1978)
- Chrysler New Yorker (1959, 1975-1978)
- Cadillac Series 75 Fleetwood (1952-1956)
- Cadillac Series 62 (1952-1956)
- Cadillac Series 60 Fleetwood (1952-1956)
- Cadillac Eldorado (1953-1956)
- Cadillac DeVille (1953-1956)
- Cadillac Commercial Chassis (1952-1956)
A true OEM auto parts brand for GM and non-GM vehicles, ACDelco® offers a wide portfolio of parts designed to keep vehicles on the road longer. These parts work precisely and fit perfectly because they are designed, engineered, tested, and backed by General Motors. But ACDelco also carries aftermarket components that go through the same 18-step quality approval process as the OE parts. Whether customers choose OE or aftermarket, they’d get the same reliable performance, precise engineering, and superior reliability for years to come. ACDelco’s expansive product portfolio includes alternators, filters, batteries, brakes, belts and hoses, oil and fluids, and suspension parts. These products are made to meet GM and non-GM vehicles’ ever-evolving powertrain, collision, maintenance, and repair needs.
California residents see Prop 65 Warning(s)
Don't know your part number?
Take a photo and we'll identify it!
