COLE HERSEE part description

Two positions: Off-On. For 6-36V DC systems. Will disconnect the battery and the alternator or generator field circuit. Electrical ratings: Large studs: 1000A intermittent. 15 seconds On, 5 minutes Off. 125A continuous (unless noted). Small studs: 20A continuous. Diecast lever. Plated steel case. Silver-laminated contacts. Brass mounting stem 3/4" -16 thread 17/32" (13.5mm) long. Fits panels through 1/4" (6.4mm) thick. Two 3/8" -24 and two 10-32 studs. O-ring seal in the operating shaft, and gasket sealed terminal insulator.
Property Value
Package Type 75904-01-BX
Details Double Pole - Two Positions: Off-On
Rating 6-36 Vdc; Large studs 125A continuous - 1000A intermittent 15 sec. On 5 min. Off; Small studs 20A continuous
Terminals two 3/8 copper studs
two 10-32 studs
Actuator Chrome Lever
Case Plated Steel
Indexing and alignment pin
Installation 3/4in Through hole
Mounting stem brass 3/4 - 16 thread 17/32 long fits panel through 1/4 thick

Cole Hersee Double Pole Master Disconnect Switch

The Cole Hersee 75900 Series double pole master disconnect switch can effectively cut off the battery, alternator, or generator field circuit from the electrical system. This weather-resistant version comes complete with terminals, lock washer, and hex nuts.

Features & Benefits

  • Ensures the electrical system shuts down during maintenance or in an emergency
  • Can control up to two systems or disconnect both positive and negative of the same circuit
  • Epoxy and gasket-sealed construction with both poles separately insulated
  • High-quality silver contact surfaces and brass hex nuts

Cole Hersee® is highly valued in the heavy duty truck industry. It is a leading manufacturer of heavy-duty battery master switches that are widely used as OE equipment by leading heavy-duty vehicle manufacturers. These switches are essential safety components for trucks as they help prevent theft, tampering, electrical fires, and battery drain. Founded in 1924, Cole Hersee is committed to improving vehicle safety by partnering with ECCO Safety Group Australia (ESGA) to establish and implement safety standards for trucks that drive onto mining sites. Its products are also manufactured in its ISO 9001:2008-certified facility and undergo strict testing to ensure safety and reliability.

Don't know your part number?

Take a photo and we'll identify it!

Recommended Products

More from COLE HERSEE (Browse all)