COLE HERSEE part description
Cole Hersee intermittent and continous solenoids provide safe, dependable control of electrical systems on all type of DC low voltage vehicles. In addition, they are ideal for marine applications and for forward and reverse systems in golf carts, garden tractors, fork lift trucks and winch operation.
Solenoids are relays which are commonly used to remotely switch a heavier current. By using a solenoid, the amount of heavy wiring needed to power the load is reduced, since the control circuit mounted inside the cab typically utilizes a smaller wire gauge.
Housing are available in plated steel, phenolic or plasticized steel. A latching solenoid can act as a remote disconnect switch.
All products listed in this section can be found in Section H of the Cole Hersee D-275 CATALOG.
- 24V insulated Normally Open contactsA pair of devices that touch or come apart at the point where the switch throw makes or breaks the circuit. Silver contacts are common because of their low conductivity and low electrical resistance. Many Cole Hersee switches have silver contacts., spstSingle Pole, Single Throw. Circuitry which describes a switch. Single Pole means that this switch controls one circuit. Single Throw means that this switch has only two positions - and those are highly likely to be On and Off., One circuit: Off - On. 85A.
- Housing: Plated steel.
- Large terminals: Copper 5/16" -24 thread, hexnuts and lockwashers included.
- Coil, ignition and ground terminals: Steel 10-32 thread, hexnuts and lockwashers included.
- Bracket mounting holes 5/16" x 19/32" (7.9 x 15.1) on 2 13/64" centers (56.0mm).
|Continuous Duty Solenoid
|copper; 10-32 thread and 5/16"-24 thread. Hex nuts and lock washers included
|Maximum current: make
|Maximum current: break
|Holes 5/16" x 19/32", 2-13/64" on center
|UL Marine & CE ISO 8846 Marine
COLE HERSEE 24063 Cross Reference
We have 2 alternatives for the 24063 by COLE HERSEE:
Cole Hersee® is highly valued in the heavy duty truck industry. It is a leading manufacturer of heavy-duty battery master switches that are widely used as OE equipment by leading heavy-duty vehicle manufacturers. These switches are essential safety components for trucks as they help prevent theft, tampering, electrical fires, and battery drain. Founded in 1924, Cole Hersee is committed to improving vehicle safety by partnering with ECCO Safety Group Australia (ESGA) to establish and implement safety standards for trucks that drive onto mining sites. Its products are also manufactured in its ISO 9001:2008-certified facility and undergo strict testing to ensure safety and reliability.