COLE HERSEE part description

Cole Hersee Rotary & Headlamp Switches include many circuitries and styles for lighting, ignition, panel dimming, windshield wiper motrol control, reversing and fuel tank selection and similar applications.
Rheostat Switches provide variable intensity control of defroster fan motors and heater blowers.

All products listed in this section can be found in Section D of the Cole Hersee D-275 CATALOG.
  • General purpose push-pull headlights switch with internal circuitA closed path (or loop) of electrically (or electromagnetically) connected components or devices that is capable of current flow. Typically consists of loads, sources, conductors, and circuit protection (circuit breakers and fuses). The path must be continuous and closed. breaker. shafy and knob are removable for ease of installation. Knob is permanently attached to the shaft. Headlamp/Parking Lights/Tail Lights function the same as in the 3-position switches, but with the addition of a rotary dimmerWe manufacture Headlamp dimmer switches such as 7786, which is floor-operated; rotary dimmer switches for internal lights such as 74601-01 and Push-Pull switches that also have a rotary dimming feature, such as 71092-02. function for panelA collection of circuit breakers, switches, and instrumentation installed into a panel which provides the central point for power distribution and monitoring for the electrical system. Also known as panelboard or dash or dashboard./dome lights.
  • In = All lights Off, except dome light on rotary dimmer. Mid = Parking lights & rear lights On; panel lights & dome light on rotary dimmer. Out = Headlights & rear lights On; panel lights & dome light on rotary dimmer.4.5 ohmThe unit of measurement for electrical resistance or opposition to current flow. Its symbol is the uppercase Greek letter omega.
  • It is named after the German physicist Georg Simon Ohm (1789-1854). Dimmer, 15A at 12V internal Circuit Breaker. With black knob imprinted with SAE headlamp symbol. Eight blade terminals accept Delphi (Packard) connector 2977645 or 2984169 (not supplied). Plated steel case. Mounting stem 7/16"-28 thread. Terminal connections: 1 to batteryA collection of voltaic cells grouped together to provide higher voltage and/or higher current than a single cell. The battery is a common DC power source, especially for vehicles or equipment that is used remote from the domestic power supply.
  • Emergency vehicles and utility vehicles often have dual battery systems because of added power demand. Such systems necessitate the use of a Battery Selector Switch or a Low Voltage Disconnect Switch. +; 2 to panel lights; 3 to rear lights; 4 to rear lights; 5 to battery +; 6 to headlights; 7 to parking lights; A to dome light. Connect frame ground terminal to ground.
Description Push-Pull Headlamp Switch with Rheostat Dash Dimmer
Details Dimmer - 4.5 Ohm resistance, Dome Light
Positions Off/Dome - Park/Tail/Panel Dim/Dome - Head/Tail/Panel-Dim/Dome
Current Rating 15A at 12V DC
Terminals 8 Blade
Mounting stem 7/16" -28
Actuator Black Plastic Knob
Actuator imprint Headlamp Symbol
Case Plated Steel, phenolic insulator

Cole Hersee Push/Pull Switch

The Cole Hersee push/pull switch allows for discrete placement in predetermined circuit closures. It is recommended for use in headlamp control and similar applications.

Features & Benefits

  • Circuits and indicators are designed for heavy repeated use
  • Heavy duty composite housing provides a balance of weight reduction and durability
  • Mounting, body, and actuator are engineered for ease-of-use
  • Built for and tested to withstand harsh operating conditions

COLE HERSEE 71092-02 Cross Reference

We have 2 alternatives for the 71092-02 by COLE HERSEE:

Cole Hersee® is highly valued in the heavy duty truck industry. It is a leading manufacturer of heavy-duty battery master switches that are widely used as OE equipment by leading heavy-duty vehicle manufacturers. These switches are essential safety components for trucks as they help prevent theft, tampering, electrical fires, and battery drain. Founded in 1924, Cole Hersee is committed to improving vehicle safety by partnering with ECCO Safety Group Australia (ESGA) to establish and implement safety standards for trucks that drive onto mining sites. Its products are also manufactured in its ISO 9001:2008-certified facility and undergo strict testing to ensure safety and reliability.

Don't know your part number?

Take a photo and we'll identify it!

Recommended Products

More from COLE HERSEE (Browse all)