COLE HERSEE 24104 - 24104 - Intermittent Duty SPST Series
- Part Number
- 24104
- Manufacturer
- COLE HERSEE
- Description
-
24104 - Intermittent Duty SPST Series
details
We cannot fulfill orders for this part at this time. Please check back later or request a stock notification to receive an email.
Sometimes we may have similar parts for sale, click the button below to see if anything matches.
COLE HERSEE part description
California Proposition 65 Warning
Solenoids are relays which are commonly used to remotely switch a heavier current. By using a solenoid, the amount of heavy wiring needed to power the load is reduced, since the control circuit mounted inside the cab typically utilizes a smaller wire gauge.
Housing are available in plated steel, phenolic or plasticized steel. A latching solenoid can act as a remote disconnect switch.
All products listed in this section can be found in Section H of the Cole Hersee D-275 CATALOG.
- 750A make, 100A break, 10sec On, 20min Off.
- Contacts: Copper.
- Terminals: Copper. Small ignition and ground terminals are 10-32 thread. Large contact terminals are 5/16" -24 thread. Hexnuts and lockwashers are included.
- Bracket mounting holes 5/16 x 19/32,†2 13/64" on centers (7.9 x 15.1, 56.0mm)
- Plated steel housing
Description | Intermittent Duty Solenoid |
Special applications | Universal |
Insulated/Grounded | Insulated |
NO/NC | normally open |
Circuitry | SPST |
Contacts | Copper |
Housing | plated steel |
Voltage rating | 24V |
Terminals | copper; 10-32 thread and 5/16"-24 thread. Hex nuts and lock washers included |
Bracket | Straight |
Bracket mounting | Holes 5/16" x 19/32", 2-13/64" on center |
Breather hole | no |
UL Marine & CE ISO 8846 Marine | Not listed |
Cole Hersee® is highly valued in the heavy duty truck industry. It is a leading manufacturer of heavy-duty battery master switches that are widely used as OE equipment by leading heavy-duty vehicle manufacturers. These switches are essential safety components for trucks as they help prevent theft, tampering, electrical fires, and battery drain. Founded in 1924, Cole Hersee is committed to improving vehicle safety by partnering with ECCO Safety Group Australia (ESGA) to establish and implement safety standards for trucks that drive onto mining sites. Its products are also manufactured in its ISO 9001:2008-certified facility and undergo strict testing to ensure safety and reliability.
Don't know your part number?
Take a photo and we'll identify it!