DEXTER AXLE part description

Integral Hub/Rotor Only for UFP DB35 3,700lb axles with 5 on 4.5" bolt pattern.

  • Uses L68149 inner bearing(1.378" ID)
  • Uses L44649 outer bearing(1.063" ID)
  • Fits UFP 3,700lb axles
  • Economical one-piece hub/rotor design
  • The rotor measures 9.75" and is 3/4" thick
  • 5 on 4.5" bolt pattern
  • Uses 168255TB seal
  • Please verify seal size to ensure correct fitment
  • Uses 1.980 OD drive-in cap
  • Inner/outer bearings, grease seal, cap & wheel nuts sold separately
  • Optional 1.98" OD caps for grease, oil, and UFP Vault applications available.

Please refer to the diagram Image for these measurements


To determine the bolt circle on hubs or wheels with an odd number of bolt holes, measure from outside to center of the studs across the pattern(bolt patterns are always measured in inches). Example: If you were to number the studs 1, 2, 3, then you would measure from the outside of stud 1 to the center of stud 3.


For more than 50 years, Dexter Axle® has been a global leader in developing and manufacturing safe and reliable trailer components for recreation vehicles, utility trailers, and specialty trailers. It is also a trusted brand in agricultural, manufactured housing, and marine markets. Headquartered in Elkhart, Indiana, and established in 1960, Dexter owns 14 manufacturing facilities across the US and Canada. Metallurgical evaluations and computer-equipped tests are also done to ensure remarkable product quality and performance. An ISO 9001:2015 certified brand, Dexter is still propelled by the same principles it has since it was founded: superior quality, constant improvement, and outstanding customer service.

Don't know your part number?

Take a photo and we'll identify it!

Recommended Products

More from DEXTER AXLE (Browse all)