A-1 Cardone 788677F - Engine Control Module
- Part Number
- 788677F
- Manufacturer
- A-1 CARDONE
- Description
-
Engine Control Module
details
We cannot fulfill orders for this part at this time. Please check back later or request a stock notification to receive an email.
Sometimes we may have similar parts for sale, click the button below to see if anything matches.
A-1 CARDONE part description
Product Description
CARDONE® Remanufactured Electronic and Powertrain Control Modules are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. All critical components are re-soldered or replaced at our Philadelphia manufacturing plant, and each unit is 100% computer tested to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance.
Features and Benefits
- Tested with automated, computerized equipment or bench-tested, depending on application, to ensure functionality.
- Re-soldering of critical components ensures superior electrical connections. This prevents intermittent failures and leads to longer product life.
- On-car vehicle validation is done to test durability and performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Product Description
Engine Control Module
Application Summary
Ford Excursion 2000, F-250 Super Duty 2001-00, F-350 Super Duty 2001-00, F-450 Super Duty 2001-00, F-550 Super Duty 2001-00
Features & Benefits
- Tested with automated computer equipment or bench-tested, depending on application, to ensure functionality.
- Re-soldering of critical components ensures superior electrical connections. This prevents intermittent failures and leads to longer product life.
- On-car vehicle validation is done to test durability and performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Engine Control Computer, ECC, ECM, Engine Control Module, Computer, Module
Product Attributes
Terminal Quantity | 104 |
Product Condition | Remanufactured |
Mounting Hardware Included | No |
Housing Material | Metal |
Removable Prom | No |
Connector Quantity | 1 |
E-waste | Yes |
Connector Shape | Rectangle |
FAQs | Yes, there's a 10 minute procedure utilizing a Tech 2 Scanner and a GM Terminal Subscription. There is also a 30 minute manual procedure that can be done without a scanner. Refer to an OE approved service manual for either option. |
Features and Benefits | Tested with automated computer equipment or bench-tested, depending on application, to ensure functionality. |
Flash Programming Required | Yes |
Flashable | Yes |
Connector Gender | Female |
Connector Quantity | 1 |
Connector Shape | Rectangle |
Flash Programming Required | Yes |
Flashable | Yes |
Height | 1.6 IN |
Height | 40.64 MM |
Length | 203.2 MM |
Length | 8 IN |
Mounting Hardware Included | No |
Removable PROM | No |
Terminal Gender | Male |
Terminal Quantity | 104 |
Terminal Type | Pin |
Width | 154.94 MM |
Width | 6.1 IN |
Package Contents | Module; Instruction Sheet |
FAQ_Q1 | What’s the difference between an ECM and a PCM? |
FAA_A1 | “ECM” stands for Electronic Control Module. “PCM” stands for Powertrain Control Module. Both the ECM and PCM control the engine; however, the PCM also has control over the transmission. |
FAQ_Q2 | Do I have to transfer anything from my original ECM/PCM? |
FAA_A2 | Some GM applications have a knock module that must be transferred to the replacement module. Some older Ford applications have a calibration module that must be transferred to the replacement module. |
FAQ_Q3 | Do all Ford vehicles require a Passive Anti-Theft System (P.A.T.S) reset? |
FAA_A3 | No, not all Ford vehicles require PATS reset. Check the PATS chart found on the O.E. Manufacturer’s Service site for your application. |
FAQ_Q4 | The replacement PCM for a Ford vehicle won’t start the vehicle. Why? |
FAA_A4 | Ensure that the PCM was properly flash programmed for the vehicle. Also note whether the vehicle is equipped with the Ford "passive anti-theft system", which requires an on-car relearn. |
FAQ_Q5 | What steps should I take to ensure the original PCM is causing the issue? |
FAA_A5 | Prior to replacing the original ECM/PCM, the installer should determine what caused the original to fail. Common causes of failures are: poor grounds and power, a bad wiring harness and short-circuited solenoids/relays. |
FAQ_Q6 | Do GM vehicles have a passive anti-theft system? |
FAA_A6 | Yes, most GM vehicles have a VATS, Pass Key or Pass Lock anti-theft system. |
FAQ_Q7 | Do I need a scanner to reset the anti-theft system |
FAA_A7 | Not necessarily. There is a 30-minute manual procedure that can be done without a scanner. Refer to your O.E. manufacturer’s approved service manual for details. |
FAQ_Q8 | Do all Chrysler Power Train Control Modules (PCM) need VIN programming? |
FAA_A8 | Chrysler models 1996 and newer will need to be VIN programmed. |
FAQ_Q9 | What are the most common symptoms of a bad PCM? |
FAA_A9 | Check Engine Light staying on after resetting, engine turning off for no reason, loss of spark, loss of fuel injection, loss of pulse on fuel pump, intermittent starting problems. |
Additional Information
Remanufactured Part | Y |
Warranty Distance | 18000 |
Warranty Distance UOM | DH |
Warranty Special UOM | TX |
Warranty Time | 12 |
Warranty Time UOM | MO |
Country of Origin (Primary) | US |
Harmonized Tariff Code (HTS) | 8543709860 |
Harmonized Tariff Code (Schedule B) | 8543709665 |
Canadian Harmonizing Tariff Code | 8543700000 |
UPC | 00082617707176 |
Part Interchanges
- Ford 1C3F12A650ABA
- Ford 1C3F12A650ABB
- Ford 1C3F12A650ABC
- Ford 1C3F12A650ABD
- Ford 1C3F12A650XA
- Ford 1C3F12A650XB
- Ford 1C3F12A650XC
- Ford 1C3F12A650XD
- Ford 1C3Z12A650ABA
- Ford 1C3Z12A650ABB
- Ford 1C3Z12A650ABC
- Ford 1C3Z12A650ABD
- Ford 1C3Z12A650XA
- Ford 1C3Z12A650XB
- Ford 1C3Z12A650XC
- Ford 1C3Z12A650XD
- Ford 1U7A12A650FSA
- Ford 1U7A12A650FYA
- Ford 1U7A12A650FYB
- Ford 1U7Z12A650FSA
- Ford 1U7Z12A650FYA
- Ford 1U7Z12A650FYB
- Ford XC3F12A650DDA
- Ford XC3F12A650DDB
- Ford XC3Z12A650DDA
- Ford XC3Z12A650DDB
- Ford XU7A12A650CB
- Ford XU7F12A650CA
- Ford XU7F12A650CB
- Ford XU7F12A650CC
- Ford XU7Z12A650CA
- Ford XU7Z12A650CB
- Ford XU7Z12A650CC
- Ford YC3F12A650AVA
- Ford YC3F12A650AVB
- Ford YC3Z12A650AVA
- Ford YC3Z12A650AVB
- Ford YU7A12A650AA
- Ford YU7A12A650AB
- Ford YU7F12A650AA
- Ford YU7F12A650AB
- Ford YU7Z12A650AA
- Ford YU7Z12A650AB
- Ford YU7Z12A650AB
- Ford 1U7A12A650FYA
- Ford XU7Z12A650CA
- Ford XU7Z12A650CB
- Ford 1C3F12A650XC
- Ford 1C3Z12A650XC
- Ford YU7F12A650AA
- Ford 1U7Z12A650FYB
- Ford 1C3Z12A650XB
- Ford XU7F12A650CC
- Ford YU7F12A650AB
- Ford 1C3Z12A650ABA
- Ford 1C3Z12A650ABC
- Ford 1C3Z12A650XD
- Ford XC3Z12A650DDB
- Ford XU7A12A650CB
- Ford 1C3F12A650ABA
- Ford YC3Z12A650AVA
- Ford XU7Z12A650CC
- Ford XC3F12A650DDA
- Ford 1U7A12A650FYB
- Ford 1C3F12A650ABB
- Ford 1C3F12A650XD
- Ford 1C3F12A650XA
- Ford 1U7Z12A650FYA
- Ford 1U7Z12A650FSA
- Ford XC3F12A650DDB
- Ford 1C3Z12A650ABD
- Ford 1C3Z12A650XA
- Ford 1C3F12A650ABD
- Ford XU7F12A650CA
- Ford YU7Z12A650AA
- Ford 1C3F12A650ABC
- Ford 1C3Z12A650ABB
- Ford 1U7A12A650FSA
- Ford XU7F12A650CB
- Ford XC3Z12A650DDA
- Ford YU7A12A650AB
- Ford YU7A12A650AA
- Ford 1C3F12A650XB
- Ford YC3Z12A650AVB
- Ford YC3F12A650AVA
- Ford YC3F12A650AVB
Fits Vehicles
- Ford F-450 Super Duty (2000-2001)
- Ford F-250 Super Duty (2000-2001)
- Ford F-350 Super Duty (2000-2001)
- Ford F-550 Super Duty (2000-2001)
- Ford Excursion (2000)
A-1 Cardone Ind.® is a leading manufacturer and distributor of automotive parts and accessories, including master cylinders, clutches, calipers, and other braking system components. Its comprehensive range of products is made using the highest quality materials and the most advanced technology to ensure reliable performance, safety, and reliability. The company traces back its roots more than 35 years ago when Michael Cardone, Sr. remanufactures his first product: the windshield wiper motor. From then on, the name A-1 Cardone has been a go-to brand of automotive enthusiasts and fleet owners when it comes to new and remanufactured products that offer not just reliability but also long-lasting service.
California Proposition 65 Warning
Don't know your part number?
Take a photo and we'll identify it!