COLE HERSEE part description

  • This item is identical to the 75920, except the black bezel is marked with the international symbols for On and Off.
  • High amperage capacityThe current handling capability or rating of a switch. Alternatively refers to the amount of charge a component (like a capacitor) can hold - measured in Farads.: 300A at 12V DC.
  • Protects vehicles against tampering, theft and batteryA collection of voltaic cells grouped together to provide higher voltage and/or higher current than a single cell. The battery is a common DC power source, especially for vehicles or equipment that is used remote from the domestic power supply.
  • Emergency vehicles and utility vehicles often have dual battery systems because of added power demand. Such systems necessitate the use of a Battery Selector Switch or a Low Voltage Disconnect Switch. drain.
  • Protects from hazards during vehicle servicing,and can be locked-out or tagged-out. Provides an effective emergency powerElectrical energy measured according to voltage and current (normally watts). Power in watts equals volts times amperes for DC circuits.
  • cutoff.
  • Can be used in both positive or in negative path applications.
  • Waterproof and dustproof to ip67IP numbers refer to INGRESS PROTECTION of a device against ingfress of dust or liquid. A switch with a rating of IP67 will resist spraying with a high pressure hose. A switch with IP68 is even more resistant. These are the two most useful numbers when you're considering spec'ing a switch. (immersible).
  • Switch can be located in the best location, regardless of environment.
  • Composite engineered polymer housing will not rust or corrode.
  • Tested per SAE 1455 for salt corrosion.
  • Large red knob is easy to operate with gloved hands; 90º switch travel makes it easy to identify the switch position.
  • Built-in lockout satisfies oshaThe US federal Occupational Safety and Health Administration at osha.gov OSHA's mandate is to improve health and safety in the workplace by enforcing standards. Such standards encourage the use of Master Disconnect Switches (like 75920) that can be locked-out or tagged-out. requirements for an energy isolation device.
  • Attractive styling suitable for visible mounting close to operator.
  • Large divider on base prevents accidental shorting of high energy cables.
  • Fits standard Master Disconnect mounting pattern.
  • Knob is secured in place with a set screwA threaded fastener typically used to hold a sleeve, collar or gear on a shaft to prevent relative motion. You can find it on several Cole Hersee brand knobs, many of which have a metal sleeve with set screw to insure reliable operation. A set screw normally does not have a head. Various socket types are provided to allow the set screw to be rotated. These types include hexagon socket, fluted socket, screwdriver slot and square head. .
Property Value
Installation fits standard Master Disconnect Switch hole
operating temperature range -40degC to +85degC
Corrosion test 96hours salt spray test to ASTM standard
Vibration test 10-500Hz to SAE J1455
Shock test To SAE J1455
Battery terminals 3/8" - 24 70-90 in-lbs (8-10Nm)
Mounting hardware 3/4" - 16 18ft-lbs max (24.4Nm)
Operating voltage 6V min 36V max
Continuous current 12V 300A max, 24V 250A max, 36V 200A max
Intermittent current 12V 1000A 90sec On 5 min Off
Intermittent current 12V 2000A 30sec On 5 min Off
Description Master Disconnect Switch
Continuous Rating 300A max at 12V, 250A max at 24V, 200A max at 36V DC
Intermittent Rating 1000A at 12V 90sec On, 5min Off, 3000A at 12V 15sec On, 5min Off
Lockout Integral holes accept padlock. Meets OSHA requirements
Case Engineering thermoplastic
Sealing Waterproof and dustproof to IP67, tested to SAE J1455
Intermittent current 12V 3000A 15sec On 5 min Off
Bezel imprint International I and 0 (On and Off)

COLE HERSEE 75920-05 Cross Reference

We have 2 alternatives for the 75920-05 by COLE HERSEE:

Cole Hersee® is highly valued in the heavy duty truck industry. It is a leading manufacturer of heavy-duty battery master switches that are widely used as OE equipment by leading heavy-duty vehicle manufacturers. These switches are essential safety components for trucks as they help prevent theft, tampering, electrical fires, and battery drain. Founded in 1924, Cole Hersee is committed to improving vehicle safety by partnering with ECCO Safety Group Australia (ESGA) to establish and implement safety standards for trucks that drive onto mining sites. Its products are also manufactured in its ISO 9001:2008-certified facility and undergo strict testing to ensure safety and reliability.

Don't know your part number?

Take a photo and we'll identify it!

Recommended Products

More from COLE HERSEE (Browse all)