COLE HERSEE 48610 - LVD, MINI, 10A, 12/2

FlexMod LVD (Low Voltage Disconnect Switch) vdLow Voltage Disconnect Switch. A versatile electronic unit that conserves vehicle starting power by shedding auxiliary loads and reconnecting them when battery is replenished. Some LVDs can be programmed to an array of parameters such as time or voltage levels. Available in different sizes/amperages: 48512 (150A) and 48510 are 6 x 5.25 x 3" 48513 (100A at 12V or 24V DC) is 4.5 x 4.25 x 3" 48510 (10A at 12V or 24V DC) is only 4 x 3 x 1" : Makes sure your vehicles will always start! 10A at 12V DC, 12-32V. Automatically disconnects specified loads when unit senses that vehicle battery is too low; automatically reconnects when voltage is restored. Unit is auto-ranging - it senses 12 or 24V systems. Size: 4.0 x 2.7 x 1.3" (102 x 69 x 33mm) Unit protects circuit against overvoltage and overcurrent. System will disconnect load after 1 sec of excessive current, and auto-recover after 10 seconds. Quiescent current 1mA typical, 2mA max.

• lvdLow Voltage Disconnect Switch.
• A versatile electronic unit that conserves vehicle starting power by shedding auxiliary loads and reconnecting them when battery is replenished.
• Some LVDs can be programmed to an array of parameters such as time or voltage levels.
• Available in different sizes/amperages:
• 48512 (150A) and 48510 are 6 x 5.25 x 3"
• 48513 (100A at 12V or 24V DC) is 4.5 x 4.25 x 3"
• 48510 (10A at 12V or 24V DC) is only 4 x 3 x 1" : Makes sure your vehicles will always start!
• 10A at 12V DC, 12-32V.
• Automatically disconnects specified loads when unit senses that vehicle battery is too low; automatically reconnects when voltageElectrical pressure, the force that causes current to flow through a conductor. Voltage must be expressed as a difference of potential between two points since it is a relational term. Connecting both voltmeter leads to the same point will show no voltage present although the voltage between that point and ground may be thousands of volts.
• Calculations often involve Ohm's Law, q.v. is restored.
• Unit is auto-rangingA device is auto-ranging when it can 'sense' the supply voltage (such as 12V or 36V) and can operate according to that voltage. Such devices can be used at different voltages. Cole Hersee brand FlexMod LVDs 48610 is an example of an auto-ranging device. Many modern multimeters are auto-ranging. Autoranging devices are advantageous to the distributor - since an autoranging device may be usable at different voltage, a distributor need only stock one SKU, instead of several. - it senses 12 or 24V systems.
• Size: 4.0 x 2.7 x 1.3" (102 x 69 x 33mm)
• Unit protects circuitA closed path (or loop) of electrically (or electromagnetically) connected components or devices that is capable of current flow. Typically consists of loads, sources, conductors, and circuit protection (circuit breakers and fuses). The path must be continuous and closed. against overvoltageA voltage greater than the rating of a device or component.
• overcurrent and overvoltage are highly likely to damage circuit components. Many Cole Hersee brand electronic products provide protection to the entire circuit components.
• and overcurrent. System will disconnect load after 1 sec of excessive current, and auto-recover after 10 seconds.
• Quiescent current 1mA typical, 2mA max.

Property	Value
Description	Low Voltage Disconnect Switch
Dimensions	4 x 2.7 x 1.31" (101.6 x 68.6 x 33.3mm)
Voltage	12 or 24V DC autoranging
Standby current	1mA
Connector	8-pin sealed Deutsch type (not supplied, but supplied with 48610-01)
Operating temperature range	-40degC to +85degC (-40degF to +85degF)
Ingress protection	IP67 per IEC 529
Humidity	0 to 90 %RH
Vibration	10-500Hz per SAE J1455
Shock	per SAE J1455
Thermal shock	per SAE J1455
Inductive transient	+/- 600V per SAE J1455
Load dump	+ 150V per SAE J1455
Disconnect voltage (12V)	12.05V min, 12.1V typ, 12.15V max
Disconnect voltage (24V)	24.1V min, 24.2V typ, 24.3 max
Load current	10A at 85degC max
Overcurrent protection	15A

COLE HERSEE 48610 Cross Reference

We have 2 alternatives for the 48610 by COLE HERSEE:

• TDAR806021
• 48610-01-BX