COLE HERSEE M54111-01 - Cole Hersee Toggle Switches SPST, ON-OFF, 4 BLADES, LIGHTED TIP

Cole Hersee toggle switches are manufactured in many different configurations. They're available with ball, short or long handles, paddle and illuminated actuators. Housing are plastic, plastic/metal combination or die cast. Weather resistant options are available that make any standard toggle switch adaptable for use in applications where moisture, dirt and similar elements are present.
Toggle switch accessories include weather resistant boots, face plates, switch guards, and handle extensions.
All products listed in this section can be found in Section B of the Cole Hersee D-275 CATALOG.

• IndependentIlluminated Rocker or Toggle Switches have dependent or independent illumination. The pilot light on the DEPENDENT switch is On when the switch is actuated and the load is energized (and Off when it's not). The pilot light on an INDEPENDENT switch is turned On by an external switch, whether load is On or Off. It may at first seem counterintuitive, but the pilot lights of an INDEPENDENT switch are independent of the state of the switch. illumination switches can be wired for dependent operation.
• Tip of handle is illuminated red in the On position, clear in the Off position.
• Silver contactsA pair of devices that touch or come apart at the point where the switch throw makes or breaks the circuit. Silver contacts are common because of their low conductivity and low electrical resistance. Many Cole Hersee switches have silver contacts..
• 15/32" -32 thread mounting stem.
• Nickel-plated brass hexnut.
• Black plastic handle, housing and facenut.
• Keyway in the down position.
• Blade terminals.
• 25A at 12V DC.
• Plastic facenut can be replaced with black metal facenut 83252.
• Up: On, Down: Off. Four blade terminals.

Switch type	Toggle
Description	Lighted Toggle Switch ( light on toggle tip)
Circuitry	SPST
Electrical Rating	25A at 12V DC
Contacts	Silver
Housing	Black plastic
Up position	On
Center position	None
Down position	Off
Terminals	4 blade
Handle material	Black plastic
Handle type	Standard
Handle size: inches	11/16" Long
Handle size: mm	17.46mm
Mounting hardware	Black finished face nut & plated hex nut
Mounting stem material	Black plastic
Mounting stem dimmensions	15/32" -32 thread, 15/32" (11.90mm) Long
Mounting hole dimension	15/32" (11.90mm) Panel Hole
Panel thickness	Up to 1/4" (6.35mm) thick

COLE HERSEE M54111-01 Cross Reference

We have 2 alternatives for the M54111-01 by COLE HERSEE:

• M-54111-02
• CHSM5411101