Name: Cole Hersee 75600-07 75600-07 - Electronic Windshield Wiper Switches Series
SKU: 7560007
Price: 155.96 USD
Availability: OutOfStock

COLE HERSEE part description

California Proposition 65 Warning

WARNING: This product can expose you to chemical which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov. (Read more)

All products listed in this section can be found in Section E of the Cole Hersee D-275 CATALOG.

For one motor, 12V DC.
With dynamic parking.
With intermittentSome switches are designed for infrequent (or intermittent) use. Devices such as solenoids may need a cooling period before they should be re-actuated. Rating a switch for intermittent use typically allows it to operate at a higher current than might otherwise be recommended. See CONTINUOUS. You can use a Continuous Duty Solenoid in place of an Intermittent Duty Solenoid, but it would have a shorter life expectancy compared to the purpose-built Intermittent Duty Solenoid. DO NOT use an Intermittent Duty Solenoid in place of a Continuous Duty Solenoid! delayA difference in time between the start of an event and its occurrence. Typically used in descriptions of fuses. A fuse with a short delay trips faster, but in many cases, a longer delay may be desirable. feature for permanent magnet electric wiper motors.
Ensures dependable control of windshield wipers on heavy duty vehicles.
Negative ground only.
4 positions: Off-Park - intermittent range - Low - High.
Push-to wash one to three wipes after knob is released.
Supplied without knob.
Diecast case 2 7/32" (56.4mm) square, 1 13/16" (46.0mm) long.
7/16 - 28 thread mounting stem 0.45" (11.3mm) long.
Hexnut and lockwasher included.
Switches conform to SAE J1455, SAE J112a and SAE J234.
Switch controls most two-speed wiper motors.
Microprocessor design.
Six color-coded wire leads, 5" (127.0mm) long.
Controls one motor.
One 7-pole connector.
Supplied with hexnut and lockwasher for mounting.
Lead and connector assembly: 5.625" (142.9mm) long.
Wiring:
Red – Power
Black – Ground
Yellow – Low Speed
White – High Speed
Brown – Washer
Blue – Park

Description	Wiper switch
Details	12V DC controls one motor
Positions	4 positions: Off-Park - intermittent range - Low - High
Terminals	7 pole connector
Mounting stem	1 13/16" (46.0mm) long. 7/16 - 28 thread mounting stem 0.45" (11.3mm) long.
Actuator	Supplied without knob
Case	Diecast
O-Ring seal	No
Min qty

Cole Hersee Windshield Wiper Switch

The Cole Hersee windshield wiper switch provides reliable in-cabin wiper control on heavy duty vehicles. It is not compatible with self-parking wiper motors.

Features & Benefits

Push-to-wash capability that allows for 2-3 full wipes once the button is released
Comes with a built-in intermittent delay feature for permanent magnet wiper motors
Durable power supply circuit that resists noise, reverse polarity, RF radiation, and load dump
Complies with SAE J1455, J112a, and J234 requirements

COLE HERSEE 75600-07 Cross Reference

We have 2 alternatives for the 75600-07 by COLE HERSEE:

Cole Hersee® is highly valued in the heavy duty truck industry. It is a leading manufacturer of heavy-duty battery master switches that are widely used as OE equipment by leading heavy-duty vehicle manufacturers. These switches are essential safety components for trucks as they help prevent theft, tampering, electrical fires, and battery drain. Founded in 1924, Cole Hersee is committed to improving vehicle safety by partnering with ECCO Safety Group Australia (ESGA) to establish and implement safety standards for trucks that drive onto mining sites. Its products are also manufactured in its ISO 9001:2008-certified facility and undergo strict testing to ensure safety and reliability.