A-1 Cardone 30-2610 - Distributor
- Part Number
- 30-2610
- Manufacturer
- A-1 CARDONE
- Description
-
Distributor
details
$10449
+$39.60 Core Deposit
Total price w/ core: $144.09
MSRP: $107.09
Save: $2.60
In stock
limited availability at this price!
A-1 CARDONE part description
Brand: Cardone Industries
Manufacturer's Part Number: 30-2610
Part Type: Distributors
Product Line: Cardone Remanufactured Distributors
UPC: 00082617029339
Computer-Controlled Compatible: No
Trigger Style: Stock
Advance Type: Stock
Ignition Box Required: No
Slip Collar: No
Distributor Gear Rotation: Standard
Housing Material: Stock
Housing Finish: Stock
Marine Use: No
Quantity: Sold individually.
Notes: Points type distributor.
For over 40 years, Cardone's innovative remanufacturing processes have provided a high-quality, lower-cost alternative to new replacement parts. It doesn't matter if your vehicle is vintage or fresh off of the dealer's lot--Cardone is your source for the highest quality remanufactured parts. Through "reverse-engineering" failed parts, their engineers see where, and why, they failed. They reengineer their remanufactured products, where applicable, to reinforce failure-prone areas for longer-lasting performance. Cardone remanufactured parts cost up to 50 percent less than new--especially true with late-model, high-tech products. Cardone restores used auto parts back to their original fit and function, using only about 20 percent of the energy and raw material needed to build a new part; so you not only save money, but you also help save our planet.
Features of Cardone remanufactured distributors include:
* All electronic module components are 100 percent computer-tested to ensure full functionality
* Automated test equipment verifies signal strength, correct polarity of wire harness, air gap, and crank reluctor tooth size, as well as ignition coil and pickup performance
* Cardone uses the right gear hardness for the appropriate application: if the gear is too hard, it will damage the cam; if it's too soft, the gear itself will be damaged, potentially causing severe engine damage (many offshore manufacturers use only one gear hardness)
* OE components with consistently high failure rates are 100 percent replaced or repaired to meet or exceed OE performance
* Precise machining tolerances prevent oil leakage, poor timing, the setting of the "Check Engine" light, and premature failure
Product Description
Distributor
Application Summary
Ford Bronco 1967-66, Club Wagon 1967, Country Sedan 1970-68, Custom 1972-65, Custom 500 1972-65, E-100 Econoline 1977-69, E-100 Econoline Club Wagon 1977-75, E-150 Econoline 1977-75, E-150 Econoline Club Wagon 1977-75, E-200 Econoline 1974-69, E-250 Econoline 1977-75, E-250 Econoline Club Wagon 1977, E-300 Econoline 1974-69, E-350 Econoline 1977-75, E-350 Econoline Club Wagon 1977, Econoline 1967, F-100 1977-65, F-150 1977-75, F-250 1977-65, F-350 1977-65, Galaxie 1967-65, Galaxie 500 1972-65, P-350 1976-68, P-400 1976-75, P-500 1977-75, Ranch Wagon 1972-68
Features & Benefits
- All electronic module components are 100% computer tested to ensure full functionality.
- O.E. components with consistently high failure rates are 100% replaced or repaired to meet or exceed O.E. performance.
- Precise machining tolerances prevent oil leakage, poor timing, setting of the "Check Engine" light, and premature failure.
- Automated test equipment verifies signal strength, correct polarity of wire harness, air gap, crank reluctor tooth size, as well as ignition coil and pickup performance.
- 100% new points and condensers installed where applicable.
- Remanufactured under stringent quality standards to ensure product reliability.
- Guaranteed fit and function.
- Meets or exceeds O.E.M. performance.
Distributor, Distributor and Module, Electronic Distributor, HEI Distributor
Product Attributes
Color | Gray |
Product Condition | Remanufactured |
Cylinders | 6 |
Distributor Cap Included | No |
Ignition Rotor Included | No |
Distributor Type | Point Type |
Electronic Module Supplied | No |
Coil Wire Included | No |
Integrated Ignition Coil | No |
E-waste | Yes |
Features and Benefits | Remanufactured under stringent quality standards to ensure product reliability |
Coil Wire Included | No |
Computer Controlled Compatible | No |
Connector Type | Unsealed |
Distributor Cap Included | No |
Gear Material | Cast Iron |
Gear Tooth Quantity | 16 |
Grade Type | Regular |
Housing Material | Aluminum |
Ignition Box Required | No |
Ignition Rotor Included | No |
Length | 8.374 IN |
Length | 212.7 MM |
Marine Approved | No |
Rotor Rotation | Clockwise |
Shaft Diameter | 2.7 IN |
Shaft Diameter | 68.58 MM |
Shaft Length | 7.99 IN |
Shaft Length | 202.95 MM |
Shaft Material | Steel |
Terminal Gender | Female |
Terminal Quantity | 1 |
Terminal Type | Ring |
Trigger Type | 2 Finger |
Vacuum Advance Type | Centrifugal |
Slip Collar | Yes |
Package Contents | Distributor; Instruction Sheet |
Is Prop Sixty Five Affected | No |
Does it require SDS | No |
Contains Electronic Components | Connector |
Is Item A Chemical | No |
Is Or Contains A Battery | No |
Is Or Contains A Bulb | No |
Is the item CARB affected | No |
Additional Information
Remanufactured Part | Y |
Warranty Distance | 18000 |
Warranty Distance UOM | DH |
Warranty Special UOM | TX |
Warranty Time | 12 |
Warranty Time UOM | MO |
Country of Origin (Primary) | MX |
Harmonized Tariff Code (Schedule B) | 8511300040 |
Harmonized Tariff Code (HTS) | 8511300040 |
Canadian Harmonizing Tariff Code | 8511300010 |
UPC | 00082617029339 |
Fits Vehicles
- Ford Econoline (1967)
- Ford Custom (1965-1972)
- Ford Club Wagon (1967)
- Ford Ranch Wagon (1968-1972)
- Ford Custom 500 (1965-1972)
- Ford E-200 Econoline (1969-1974)
- Ford Galaxie 500 (1965-1972)
- Ford Galaxie (1965-1967)
- Ford E-300 Econoline (1969-1974)
- Ford Country Sedan (1968-1970)
- Ford Bronco (1966-1967)
- Ford P-400 (1975-1976)
- Ford P-350 (1968-1976)
- Ford P-500 (1975-1977)
- Ford F-350 (1965-1977)
- Ford F-250 (1965-1977)
- Ford F-150 (1975-1977)
- Ford F-100 (1965-1977)
- Ford E-250 Econoline Club Wagon (1977)
- Ford E-350 Econoline Club Wagon (1977)
- Ford E-350 Econoline (1975-1977)
- Ford E-150 Econoline Club Wagon (1975-1977)
- Ford E-250 Econoline (1975-1977)
- Ford E-150 Econoline (1975-1977)
- Ford E-100 Econoline Club Wagon (1975-1977)
- Ford E-100 Econoline (1969-1977)
A-1 Cardone Ind.® is a leading manufacturer and distributor of automotive parts and accessories, including master cylinders, clutches, calipers, and other braking system components. Its comprehensive range of products is made using the highest quality materials and the most advanced technology to ensure reliable performance, safety, and reliability. The company traces back its roots more than 35 years ago when Michael Cardone, Sr. remanufactures his first product: the windshield wiper motor. From then on, the name A-1 Cardone has been a go-to brand of automotive enthusiasts and fleet owners when it comes to new and remanufactured products that offer not just reliability but also long-lasting service.
California Proposition 65 Warning
Don't know your part number?
Take a photo and we'll identify it!