TRAILER PARTS PRO part description

Redline Hub W/ 5 on 4.5" Bolt Pattern For 3,500lb Axles

Redline hub kits come with some of your main components like the inner and outer bearings. With Redline kits there is no need to worry about the races as they are already pressed into the hub for you. You will also get the grease seal, grease cap, and wheel nuts for the hub. This hub is designed for use with a #84 spindle. Each Hub has a 1,750lb capacity. Spindle nut and spindle washer sold separately.

Items in Kit:

  • 1 L68149 Inner Bearing (1.378" ID)
  • 1 L44649 Outer Bearing (1.063" ID)
  • 1 L44610 Outer Race (Already Pressed In) 1.98" OD
  • 1 L68111 Inner Race (Already Pressed In) 2.361" OD
  • 1 10-19 Grease Seal (1.719" x 2.565")
  • 1 46749 Grease Cap (1.986" OD)
  • 1 21-41-1 Grease Cap (1.986" OD)
  • 1 85-1 Grease Cap Plug
  • 5 X1023R Coned Wheel Nuts
  • 1 5 on 4.5" Pregreased Hub For Convenience
  • 1,750lb Capacity Per Hub

Please refer to the diagram Image for these measurements



To determine the bolt circle on hubs or wheels with an odd number of bolt holes, measure from outside to center of the studs across the pattern(bolt patterns are always measured in inches). Example: If you were to number the studs 1, 2, 3, then you would measure from the outside of stud 1 to the center of stud 3.

TRAILER PARTS PRO H84545BX Cross Reference

We have 1 alternatives for the H84545BX by TRAILER PARTS PRO:

Don't know your part number?

Take a photo and we'll identify it!

Recommended Products

More from TRAILER PARTS PRO (Browse all)