A-1 Cardone 60-7007 - CV Axle Assembly
- Part Number
- 60-7007
- Manufacturer
- A-1 CARDONE
- Description
-
CV Axle Assembly
details
$8499
5 day lead time
limited availability at this price!
A-1 CARDONE part description
- 100% Neoprene boots ensure excellent ozone resistance, which eliminates cracking, a leading cause of boot failure.
- 3% moly grease withstands high temperature and pressure extremes, which extends joint life.
- Clamps are tightened with pneumatic machinery, creating a perfect seal between the boot and housing.
- High-tech grinding machines maintain precise tolerances of the O.E. design for the outer housing, race and cage to guarantee reliable performance.
- Splines are chased 100% to ensure proper fit of axle into the mating hub and transmission, which eliminates installation hassles.
- Threads are chased 100% to ensure proper fit when axle nut is installed.
Product Description
CV Axle Assembly
Application Summary
Subaru Forester 2000-98, Impreza 2001-93, Legacy 1999-90
Features & Benefits
- Neoprene boots ensure excellent environmental stress resistance, which eliminates cracking - a leading cause of boot failure.
- Boot clamps are pneumatically crimped, creating a perfect seal between the boot and housing.
- High-quality grease withstands high-temperature and pressure extremes, which extends joint life.
- High-tech grinding machines maintain the original design of the outer housing, race and cage to guarantee reliable performance.
- CV Drive Axle shafts are inspected for run out to prevent vibration.
- CV Drive Axle is measured after assembly to ensure proper fit.
- Splines are chased to ensure proper fit of the axle into the mating hub and transmission, which eliminates installation hassles.
- Threads are chased to ensure proper fit of the new retaining nut supplied with each CV Drive axle.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
CV, CV Axle, CV Drive Axle, CV Axle Shaft, Halfshaft, Constant Velocity Axle, Constant Velocity Drive Axle, Axle Shaft
Product Attributes
Package Contents | Complete Axle; Instruction sheet; Roll Pin |
Product Condition | Remanufactured |
Spindle Nut Included | Yes |
Spindle Nut Thread Size | M22X1.5 |
Axle Nut Locking Type | Stake |
ABS Ring Included | No |
Input Shaft Connection Style | Spline |
Output Shaft Connection Style | Spline |
E-waste | No |
FAQs | When the replacement drive axle was installed, the sensor ring, sensor, or sensor wiring on or near the axle was damaged, causing an erratic speed signal to the ABS module and setting the light on. |
Features and Benefits | Threads are chased to ensure proper fit of the new retaining nut supplied with each CV Drive axle. |
Compressed Length (in) | 26.9375 |
ABS Tone Ring Included | No |
Axle Nut Included | Yes |
9341 | 36.7 MM |
9341 | 1.445 IN |
9337 | 32 MM |
9337 | 1.259 IN |
Axle Nut Thread Size | M22x1.5 |
Axle Nut Type | Hex |
Boot Color | Black |
Boot Material | Neoprene |
Boot Rib Quantity | 3 |
Compressed Length | 26.94 IN |
Compressed Length | 684.21 MM |
CV Joints Included | Yes |
Dynamic Damper Attached | No |
Grade Type | Standard |
Inboard Joint Type | Spline |
Inboard Spline Quantity | 25 |
Mount Type | Spline |
Outboard Joint Type | Spline |
Outboard Spline Quantity | 27 |
Shaft Diameter | 1.028 IN |
Shaft Diameter | 26.11 MM |
Shaft Material | Steel |
Slip Yoke | No |
Universal Joints Included | No |
Contains Electronic Components | No |
Does it require SDS | No |
Is Item A Chemical | No |
Is Or Contains A Battery | No |
Is Or Contains A Bulb | No |
Is Prop Sixty Five Affected | No |
Is the item CARB affected | No |
FAQ_Q1 | Are the CV Drive Axle shafts balanced at the factory? |
FAA_A1 | Shafts are inspected 100% for run out to prevent vibrations. Only shafts that meet the specifications for run out are utilized in the remanufacturing of a CV Drive Axle assembly. |
FAQ_Q2 | I installed a replacement CV drive axle and now my ABS light is on and won't go out. Why? |
FAA_A2 | When the replacement drive axle was installed, the sensor ring, sensor, or sensor wiring on or near the axle was damaged, causing an erratic speed signal to the ABS module and setting the light on. |
FAQ_Q3 | When I cut the wheel hard and step on the gas, I hear loud clicking and snapping. What's making that noise? |
FAA_A3 | The most likely cause is a defective or worn outer CV drive axle joint. It may be time to get it replaced. |
FAQ_Q4 | When I step on the gas, I hear a loud thump and feel a bad vibration. What's wrong? |
FAA_A4 | The most likely cause is the drive train shifting in the chassis due to a broken engine mount or hardware, causing misalignment of the CV drive axle and causing the inner joint to bind or hang up. |
FAQ_Q5 | I hear a grinding noise from the front end while driving and see grease on the chassis and suspension. What is causing this? |
FAA_A5 | The most likely problem is the outer CV drive axle boot has ruptured, causing the grease to leak out, allowing contamination (water and dirt) to enter and damage the joint. |
FAQ_Q6 | I removed both CV drive axles at the same time and now I am having problems reinstalling them. What can I do? |
FAA_A6 | The transaxle gear alignment has been lost. On some vehicles it will be necessary to disassemble the transaxle to properly align the output gears. ALWAYS remove and install one CV drive axle at a time. |
FAQ_Q7 | The old CV Drive Axle has a locking style (prevailing torque) nut. Should I reuse it? |
FAA_A7 | NO! A prevailing torque lock nut should never be reused. Always discard the old nut and install a new one. |
FAQ_Q8 | The CV Drive Axle outboard joint stub shaft is stuck in the hub assembly. What's the best way to remove it? |
FAA_A8 | Always use the proper press type tool to remove the old stub shaft. NEVER strike the outer joint stub shaft with a hammer. It will damage the unit and possibly do damage to the hub bearing assembly. |
FAQ_Q9 | Is it OK to use an impact hammer to install the retaining nut? |
FAA_A9 | Never use an impact wrench to install the retaining nut on the CV Drive Axle. Always use a torque wrench and torque the nut to manufacture's specifications. |
FAQ_Q10 | When I replace the CV drive axles, should I reuse the old seals? |
FAA_A10 | When replacing CV Drive Axle assemblies, always install new transaxle seals to avoid leaking. |
FAQ_Q11 | Can I let the CV Drive Axles hang while I am working on the car? |
FAA_A11 | Never allow the CV Drive Axles to hang unsupported. This can lead to axle separation and damage to the inner joint. |
FAQ_Q12 | The wheels wobble when I make a turn. What's the problem? |
FAA_A12 | The most likely cause is a broken bearing cage due to excessive torque load. This is typically an outboard joint problem. |
Additional Information
Remanufactured Part | Y |
Warranty Distance | 18000 |
Warranty Distance UOM | DH |
Warranty Special UOM | TX |
Warranty Time | 12 |
Warranty Time UOM | MO |
Country of Origin (Primary) | MX |
Harmonized Tariff Code (HTS) | 8708508500 |
Harmonized Tariff Code (Schedule B) | 8708508500 |
Canadian Harmonizing Tariff Code | 8708508900 |
UPC | 00082617473682 |
Part Interchanges
- Subaru 28021AA013
- Subaru 28021AA031
- Subaru 28021AA032
- Subaru 28021AA033
- Subaru 28021AA130
- Subaru 28021AA131
- Subaru 28021AA132
- Subaru 28021AA160
- Subaru 28021AA161
- Subaru 28021AA162
- Subaru 28021AA491
- Subaru 28021AA511
- Subaru 28021AA541
- Subaru 28021AA551
- Subaru 28021AC130
- Subaru 28021AC150
- Subaru 28021AC171
- Subaru 28021AC190
- Subaru 28021AC210
- Subaru 28021AC280
- Subaru 28021AC281
- Subaru 28021AC290
- Subaru 50A925H600R1
- Subaru 28021AA132
- Subaru 28021AA013
- Subaru 28021AA162
- Subaru 28021AA541
- Subaru 28021AA511
- Subaru 28021AC210
- Subaru 28021AA130
- Subaru 28021AA491
- Subaru 50A925H600R1
- Subaru 28021AA031
- Subaru 28021AC130
- Subaru 28021AC150
- Subaru 28021AA161
- Subaru 28021AC190
- Subaru 28021AA131
- Subaru 28021AC171
- Subaru 28021AC290
- Subaru 28021AC281
- Subaru 28021AA160
- Subaru 28021AA033
- Subaru 28021AA032
- Subaru 28021AA551
- Subaru 28021AC280
Fits Vehicles
- Subaru Legacy (1990-1999)
- Subaru Impreza (1993-2001)
- Subaru Forester (1998-2000)
A-1 Cardone Ind.® is a leading manufacturer and distributor of automotive parts and accessories, including master cylinders, clutches, calipers, and other braking system components. Its comprehensive range of products is made using the highest quality materials and the most advanced technology to ensure reliable performance, safety, and reliability. The company traces back its roots more than 35 years ago when Michael Cardone, Sr. remanufactures his first product: the windshield wiper motor. From then on, the name A-1 Cardone has been a go-to brand of automotive enthusiasts and fleet owners when it comes to new and remanufactured products that offer not just reliability but also long-lasting service.
California Proposition 65 Warning
Don't know your part number?
Take a photo and we'll identify it!