COLE HERSEE 48120 - BAT ISOL GRD 120 HEN

Cole Hersee Battery Selector Switches energize either or both of two batteries.
Master disconnect switches prevent tampering of theft when equipment is unattended.
Battery isolators prevent the battery with the higher charge from draining into the battery with the lower charge.
Battery-related accessories include remote battery jumper terminals, feed-through studs, lockout lever kits and face plates.
All products listed in this section can be found in Section J of the Cole Hersee D-275 CATALOG.

• For use with alternators that do not have an integral electronic voltageElectrical pressure, the force that causes current to flow through a conductor. Voltage must be expressed as a difference of potential between two points since it is a relational term. Connecting both voltmeter leads to the same point will show no voltage present although the voltage between that point and ground may be thousands of volts.
• Calculations often involve Ohm's Law, q.v. regulator. 140A at 12V DC, 12-36V. Terminations: three 5/16" (7.9mm) studs. Four 9/32" (7.2mm) diameter mounting holes. Size: 6 1/4"L x 4 3/16"W x 3 11/32"H (152.4 x 122.2 x 84.9mm).

Description	Battery Isolator
Details	Isolates loads of 2 batteries, allows charging from 1 source
UL listed	not listed
Rating	12-36V DC; 140A max. alternator rating; negative ground electrical system only
Terminals	three 5/16" studs
Sealing	fully sealed
Size	6"L x 4-3/16"W x 3-11/32"H
Installation	two 9/32" dia. Holes
Min qty	No

COLE HERSEE 48120 Cross Reference

We have 1 alternatives for the 48120 by COLE HERSEE:

• CHS48120