COLE HERSEE part description

Cole Hersee Rocker Switches are manufactured in many different configurations and can be either snap-in or bracket mounted.
Weather-Resistant Rocker Switches are certified to IP66 protection against dust and prolonged spray. Recognized at UL 1500: Ignition protection for marine products
Actuators can be illuminated or imprinted, contain pilot lights or have both pilots and imprinting. Accessories include rocker switch brackets for in-dash mounting and a mounting kit for under dash applications.
  • 25A at 12V DC. incandescent. These general purpose switches are suitable for many kinds of applications. They are weather-resistant with contact areas sealed to IP66 (high pressure wash resistant). Switches snap into standard rocker switch holes 1.45" x 0.08" (36.8 x 21.1mm) in panels from 0.09" to 0.19" thick (2.4 x 4.7mm). Pilot lights are independentIlluminated Rocker or Toggle Switches have dependent or independent illumination. The pilot light on the DEPENDENT switch is On when the switch is actuated and the load is energized (and Off when it's not). The pilot light on an INDEPENDENT switch is turned On by an external switch, whether load is On or Off. It may at first seem counterintuitive, but the pilot lights of an INDEPENDENT switch are independent of the state of the switch. or dependent, as noted. They have silver contactsA pair of devices that touch or come apart at the point where the switch throw makes or breaks the circuit. Silver contacts are common because of their low conductivity and low electrical resistance. Many Cole Hersee switches have silver contacts., which give superior switching performance. Housing is matte black.
  • Single poleThe number of separate circuits that can be active through a switch at any one time. So a switch can be rated SP or DP (Single or double pole)., Single throwThe number of circuit paths that can be controlled by any one pole. See ST and DT (Single and Double Throw), with dependent illumination. Three blade terminals. Amber lens.
Switch type Rocker
Description Weather-Resistant Rocker Switch, 1 Large Dependent Pilot Light
Circuitry SPST
Electrical rating 25A at 12V DC
Contacts Silver
Housing Plastic, Black
Up position Off
Center position None
Down position On (2-3)
Terminals 3 blade
Actuator material Plastic
Actuator type Rocker Button/ sealed
Actuator: inches 1.19" x .660"
Actuator: mm Weather-Resistant Rocker Switch, 1 Large Dependent Pilot Light
Actuator color Black
Actuator imprint None
Illuminated Yes
Lens color Amber
Lens size .315"(8mm) x .480"(12.31mm)
Lens imprint None
Bezel type Plastic, Black
Bezel size .964"(24.52mm) x 1.69"(43.16)
Mounting Panel snap-in
Panel thickness .093" (2.37mm) to .187" (4.76mm)
Mounting hole: inches 1.45" x .830"
Mounting hole: mm 36.83mm x 21.08mm

COLE HERSEE 58328-13 Cross Reference

We have 3 alternatives for the 58328-13 by COLE HERSEE:

Cole Hersee® is highly valued in the heavy duty truck industry. It is a leading manufacturer of heavy-duty battery master switches that are widely used as OE equipment by leading heavy-duty vehicle manufacturers. These switches are essential safety components for trucks as they help prevent theft, tampering, electrical fires, and battery drain. Founded in 1924, Cole Hersee is committed to improving vehicle safety by partnering with ECCO Safety Group Australia (ESGA) to establish and implement safety standards for trucks that drive onto mining sites. Its products are also manufactured in its ISO 9001:2008-certified facility and undergo strict testing to ensure safety and reliability.

Don't know your part number?

Take a photo and we'll identify it!

Recommended Products

More from COLE HERSEE (Browse all)