Name: Right Weigh 202-DDG-03B Digital Load Scale
SKU: 202ddg03b
Price: 792.9 USD
Availability: OutOfStock

RIGHT WEIGH part description

California Proposition 65 Warning

WARNING: This product can expose you to chemical which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov. (Read more)

Our Interior Digital scale is available in four different models depending on height control valves, please be sure to reference the details below to select the correct scale for your configuration.

Description

Right Weigh’s 202-DDG-01C interior digital load scale is designed for monitoring one height control valve (HCV). This is typically for installation on a truck monitoring a single height control valve drive axle group. The gauge also has the option of calculating an estimated steer weight based on the drive weight. After both an empty and loaded calibration has been performed at a certified ground scale, the gauge will reliably display the on-the-ground axle group weight in pounds or kilograms.202-DDG-01C – 202 Series Digital Dash Gauge – 1 Air Sensor – Chrome Bezel

On-the-ground axle group weight is displayed in pounds or kilograms on a touchscreen LCD
One air pressure sensor monitors one single height control valve axle group
Fits in a standard 2-1/16″ round gauge cutout
Estimated steer weight available when installed on a drive axle group, programmable PIN code

Corresponding Installation Kit:
101-SK

Click to Download Instruction Manual

Right Weigh’s 202-DDG-02C interior digital load scale is designed for monitoring two height control valves (HCV’s). This can be either one drive axle group with dual HCV’s, or a dedicated tractor-trailer set with one HCV each. When installed on a typical tractor-trailer with one HCV on the drive, and one HCV on the trailer, this gauge can display estimated steer, drive, and trailer weight. After both an empty and loaded calibration has been performed at a certified ground scale, the gauge will reliably display the on-the-ground axle group weight in pounds or kilograms.

On-the-ground axle group weight is displayed in pounds or kilograms on a touchscreen LCD
Two air pressure sensors monitors either one dual height control valve axle group, or a dedicated tractor/trailer set with a total of two height control valves
Fits in a standard 2-1/16″ round gauge cutout
Estimated steer weight available when installed on a drive axle group, programmable PIN code

Corresponding Installation Kits:

101-SK: Covers the installation from the back of the load scale to one axle group’s air suspension system

301-QDK: Covers the installation from the back of the gauge to the trailer axle suspension, using a quick disconnect system

Click to Download Instruction Manual

Right Weigh’s 202-DDG-03C interior digital load scale has 3 internal air sensors and is designed for monitoring three height control valves (HCV’s). This can be a combination of a dual HCV tractor, with a single HCV trailer, a single HCV truck, and 2 single HCV trailers and so on. On the display, you can setup an Estimated Steer Axle, Drive, Trailer A, and Trailer B depending on your configuration – as long as your truck and trailers consist of a total of 3 height control valves.

On-the-ground axle group weight is displayed in pounds or kilograms on a touchscreen LCD
Three air pressure sensors monitors either a dual HCV axle group along with a single HCV group, or three axle groups with a single HCV each.
Fits in a standard 2-1/16″ round gauge cutout
Estimated steer weight available when installed on a drive axle group, programmable PIN code

Corresponding Installation Kits:

You will need a combination of 101-SK kits and 301-QDK kits depending on where the HCV’s are in the system.

101-SK: (Covers back of the load scale to either a drive or steer airbag (one kit needed per height control valve)

301-QDK: (Covers back of the load scale to a dedicated trailer axle airbag (one kit needed per height control valve)

Click to Download Instruction Manual

Right Weigh’s Interior Digital scale with four air inputs monitors multiple axle group combinations totaling up to four height control valves.

Displays a full breakdown of on-the-ground weight for both drive and trailer axle groups
Calculates estimated steer axle weight
Optional calibration lock-out code
Fits a standard, round 2 1/16″ dash cutout
LCD touch screen with adjustable brightness

Compatible installation kits:

101-SK: Back of the load scale to either a drive or steer airbag (one kit needed per height control valve)

301-QDK: Back of the load scale to a dedicated trailer axle airbag (one kit needed per height control valve)

Click to Download Instruction Manual

Features & Benefits

Max Axle Groups Monitored: 3
Black bezel
Displays a full breakdown of on-ground weight for both the drive and trailer axle groups, estimated steer axle group and a total gross weight
Accurate with both empty and loaded weight calibration points
Displays weight in your choice of Lbs. or Kg
Option of setting a 6 digit PIN lock-out code
Fits in a standard, round 2 1/16" dash instrument hole
Easy to read LCD touch screen with an adjustable backlight

Right Weigh® is the truck industry's go-to brand of onboard load scales that will make your fleet run lawfully and efficiently. This brand takes the guesswork out of truck driving and maintaining legal weights before hitting the road. Born in 1998 out of a fleet owner's need for easy-to-use yet inexpensive products that could check and monitor weight loads, Right Weigh is now an industry-leading provider of liquid-filled scales, Bluetooth-enabled load scales, and load-scale accessories. Right Weigh's scales are not only versatile, but they also help operators save time and money and streamline their fleet's efficiency, productivity, and commercial operations.